Help DTC off, Audi A6 Allroad 2.7i 2004

[soxten]

Hi
Need help to do DTC off on
P1122
P1453
P1457

ecu info
Flash 29F800
4Z7907551N
0261207766
ME7.1.1
Bosch

381454

[soxten]

Plz is it possible to delete DTC on Bosch ME7?

[Gavra]

It is possible, however your file is not recognised as ME7.1.1 please read again.....

[soxten]

File is read correct!
I have this problem on broken flash to.
Is this adapter som protection etc?

382429
382430

[Gavra]

Mate, that is NOT correct read. That is so called "bridge" tuning, box inside ECU for some extra power. Remove that and install original flash with ori map. then your problems will be gone.....

[soxten]

File is correct reading.
Is this adapter som special?
It has some component under the green with lines on (right side of the adapter)
Tuning protection?

Or, do someone have original flash so I can program and solder direct on pcb?

[Gavra]

Mate that is NOT original flash , so can not be good read. This is modified ECU....

[soxten]

I have read this flas 5 times and verify and it is correct read by Wellon.
I think it is something special with this type of adapter....
Why use this type of adapter when you can desolder and solder flash easy on pcb.
I think adapter is some type of protection for people that whant to clone the tuning.

any way... :)
I have find a flash file from this site http://www.chip-tuner.hu/original_ecu_files/files/Audi/
File is attached here in this post.

Can I use this flash by program to 29F800 and solder directly to pcb?

[Gavra]

Yes you should remove bridge and use normal flash

[soxten]

Gavra thx!
I program other flash file and solder flash to pcb and test on car

[soxten]

Car starts and runs with this flash :)
But still need to delete DTC
P1602 Power low volt
P1122 Lambda 1
P1453 Exaustsensor 1
P1457 Exaustsensor 2
P1140 Lambda 2

Please can any help me with this?

[soxten]

Is it possible to make dtc off?