Clio 3

[cordeiro]

Hi

i changed the mileage in clio, Visteon, eprom 24c04, with digimaster3. I read the eprom after changing and the new mileage was ok. When i put the dashboard in place and turn on the ignition the original mileage come again.
Any help?

[Johnner]

That's because you haven't done the ABS ;)

[cordeiro]

Changed the dash and that one kept his own mileage, so why did'nt change?

[jomberykaso]

Jhonner said you why not

[Johnner]

Yes,the eeprom kept the new mileage in it....UNTIL you turned the car over...Then the new mileage got overwritten with the old data.. ;)

Again,refer to post #2 lol

[cordeiro]

http://www.digital-kaos.co.uk/forums/images/icons/icon1.png


I mean i tried another dash and the mileage was'nt overwritte. So why does the abs do that with the original dash modified and not with the dash of other car!

[lupu_sandu]

Because Digi is a fud? :D
This is Clio3 mate, don't hold mileage in ABS.

[cordeiro]

So, i'm back to the post #1

[garabounga]

disconnect battery put dach back reconnect battery thats all. Lupu Sandu is right no mileage in ABS clio 3 only 4

DONT FORGET RADIO CODE IF YOU HAVE AN ORIGINAL RENAULT RADIO

[cordeiro]

I did that and no result. The original mileage came back.
Any else?

[garabounga]

Thats really strange wich year is your clio 3? are u sure its a clio 3? not 4

i deed this one many times with digiprog never had a problem.

[cordeiro]

2012. I did it with dgimaster 3.
Did the same to a clio 3 2007 and got the same problema.
Could it be the machine?

[garabounga]

381847No i dont think so ! but try to do it with digiprog if you have it or with fvdi.

By the way is this the clio yre talking about?

[antenor]

Or put the dump here.

[cordeiro]

No.
I'm talking about clio3 and your picture is a clio4.
I just have the digimaster 3. If sameone coud send a dump with 81000 i would try to load it.
Thanks

[garabounga]

Yes put dump we will see

[cordeiro]

Can't put it. I do not find any tool to load files.

[PremierD]

Can't put it. I do not find any tool to load files.

Follow this link mate .. :)
http://www.digital-kaos.co.uk/forums/showthread.php/508573-**********-HOW-TO-UPLOAD-FILES-TO-DK-**********

[cordeiro]

Hope it is ok
many thanks

[Johnner]

Original mileage was 122993 ? See the red bytes...Change your file to them,to match what's in the blue highlighted section...You've tried to write 80k into it.

381902

[cordeiro]

Done!

many thanks

[ssemmedo]

i need to change mileage in clio3 2012. i found that mileage is in adress 00040 till 00052. when i change i found most of the time 400.000km. i need 100.000km.

[ssemmedo]

solved. i write the km win fvdi 2014. i have fvdi 2018 but it cant write 2014 is better in this kind of job.