lmsvvavr
21st June, 2016, 08:32 PM
Hi guys... I was thinking to highjack one of the threads here, but might get more of your help on a new one...
The car is the following:
Peugeot 206 2.0 HDI RHY
Bosch
HW 0281011525
SW 1037383605
The car runs with no problems, however, every now and then, about every 5 days throws a anti-pollution fault.
The scan reports EGR flow out of range... or something like that, P0400, and another two codes EGR related that I can?t remember now what they are.
If I clear the codes, runs again for another 5 days or so then the codes...
When the fault comes up, then car runs ok, no limp mode or rev restrictions...
On investigation I found that the EGR is blanked, although everything is still connected.
I checked, and looks that the EGR has been turned off on the ecu as well.
Can anyone have a look at the dump and confirm that the EGR is indeed disabled?
If it is, why is still throwing codes for it?
Thank you in advance!!!
382622
The car is the following:
Peugeot 206 2.0 HDI RHY
Bosch
HW 0281011525
SW 1037383605
The car runs with no problems, however, every now and then, about every 5 days throws a anti-pollution fault.
The scan reports EGR flow out of range... or something like that, P0400, and another two codes EGR related that I can?t remember now what they are.
If I clear the codes, runs again for another 5 days or so then the codes...
When the fault comes up, then car runs ok, no limp mode or rev restrictions...
On investigation I found that the EGR is blanked, although everything is still connected.
I checked, and looks that the EGR has been turned off on the ecu as well.
Can anyone have a look at the dump and confirm that the EGR is indeed disabled?
If it is, why is still throwing codes for it?
Thank you in advance!!!
382622