touareg kessi pin

[yeager]

hi, can someone help me get pin code from touareg kessy 93c86

[jusefzygo]

22785 not tested

[cqae]

I just tried to load it into avdi & it didnt find the PIN.........

[yeager]

finaly i find pin whit carprog ... thx

[jusefzygo]

smok........

[yeager]

smok tool cant read pin from kessy ... btw noone of pins is ok, carprog read 2 but not good, try 22785 ... same wrong
:-(

[NogaroB5S4]

If Kessy by Continental, you won't be able to decrypt PIN from dump and not covered by most tools. PIN can only be retrieved easily from Siemens VDO type kessy.

[haroutioun]

hi, can someone help me get pin code from touareg kessy 93c86
Hello.
what kind data in this eeprom? i think you read wrong eeprom from kessy, show us the pic of board on your kessy. to show you the correct eeprom which present the immo data.

[yeager]

i read from 93c66, dont see there other eep

[haroutioun]

i read from 93c66, dont see there other eep
Hello.
see the location of 93c86 eeprom in this pic of kessy touareg.

[yeager]

yes it is ...

[yeager]

here is eep read whit carprog, interest but is all other as my forst read

PS: carprog read pin 3672

[oleg68]

Hello! pin: 52576?

[yeager]

yes correct, but i cant make coding for new key

[yeager]

maybe i make something wrong
1. i open 05 start / access
2. login, put code 19795 - ok
3. security access 52576 - ok
4. adaptation - channel 21 ... new key 1 ... save
get on display Immo active

now i se that on key is
5wk45021
3d0959753a

and kessy
5wk48505
3d0909137d

[oleg68]

1. you must previously encoded transponder the dealer key 7 bytes "component security" HITAG-2. 2. then you can start the registration key.

[yeager]

customer have only one key, but he lost it ... buy a nrw one by vw dealer, but he cant make coding ... only whit new kessy ... now i have only a brant new key and i need adapt it to this car

[oleg68]

component security 384266 I'm not sure that it is correct.

[kiszka]

................

[yeager]

why not possible? key is wrong?

[oleg68]

[QUOTE = Йегер; 2800232] почему не представляется возможным? Ключ не так? [/ QUOTE]
Я думаю , что он шутит ... группы измерений показывают параметры 22, 23, 24 ка на мои фотографии , и мы будем более четко соответствовать ключу ,
я думаю ,

[kiszka]

.............

[oleg68]

This is an example.....................384488 this is a new record for the dealer the key ... then proceed to the registration key.

[yeager]

ok, here is
384519

[yeager]

any idea what to do???

[oleg68]

[QUOTE = Йегер; 2800564] ОК, вот [/ QUOTE] у вас есть новый ключ (пробел). Ваш открытый ключ, и вы можете подготовить ключа торговца. 7 байт "CS" , чтобы записать и затем зарегистрировать в автомобилях.
384519
https://www.youtube.com/watch?v=XdSss0W6Lm4

[yeager]

i dont have avdi only carprog and vcsd can i program key whit it/

[techterr]

Hate to jump in late, but where did you get the key? and what chip is in it? it takes a 46 chip not a 48.. The biggest issue we have is getting the car into programming mode... and yes, you can use VCDS.. do it all the time... Just remember to have your foot on the brake to keep the can bus alive... Once you get into programming mode, the center of the cluster will say something like adaption started.. then you turn key to the start position for about 5 seconds... usually till the car starts cranking... and then the key is programmed... With carprog, you should be able to pull the pin and write the CS to the chip...
Take care,
Tim

[yeager]

key is from vw dealer ordered for this car,
after i put pin i see on display "now start car" but after i put key i get "immo activ"

[techterr]

Can you do a scan of the car? have run into problems where the DTC's are causing the car to not start... Steering lock has been a big one with these.. The dealer key should work... I would do an auto scan with VCDS and then do a clear all...

[yeager]

but when key is not adapted, you can access only to 05, 17 and 25 ... other ecus dont work

[yeager]

think problem can be that alarm is active, but i cant assess to 46 - confort .... is it possible disable alarm?

[oleg68]

Привет! ваш ключ собран на pcf7943 или pcf7946 ??? 385029 для автомобилей после 2007 года и Audi A8 2002+ транспондер должен быть предварительно закодированы с использованием CS.

[yeager]

maybe problem will be in key, car is from year 2005, but kessy is from 2008, maybe it was changed ... key is a brant new, when i disassemble it i will lost warranty ...
edit: is it posdible that dealer order key for old kessy whit old chip, but there is a new kessy (2008) thisway i cant make adaptation

[oleg68]

Key dismantling is not necessary, it is enough to read any programmer key supporting hitag2. Kessy is adapted to the car? errors Kessy is now?

[yeager]

there is no dtc ... i realy dont know what to do, car stay 2 week and noone can help how to get work it ... :-(