ford fiesta 2014 xc2336a read C1BT-14B321-BE

[MOHCIN2]

Hi all friend i have a ford fiesta 2014 C1BT-14B321-BE and want to read it using xprog but the problem is that have SAH XC2336A 72F80L so in my version 5.5.1 i have not that serie so iam confused because eatch version has his own diagram and i ask if my version can read that airbag unit or not if someone can help please


regards

[dragon100]

Update for 5.5.5 and go...

[MOHCIN2]

my friend its the same in infineon XC2000 its the same no change i here is all option in that section what option can fit in myne to read that unit

https://s31.postimg.org/xuo8dwdtn/xc2000_INFINEON_1.jpg (https://postimage.org/)

https://s32.postimg.org/ss7v9b76d/xc2000_INFINEON_22.jpg (https://postimage.org/)hebergeur dimage (https://postimage.org/index.php?lang=french)

https://s31.postimg.org/8dbcafodz/xc2000_INFINEON_33.jpg (https://postimg.org/image/8dbcafodz/)

[MOHCIN2]

here is the pcb picture
http://img15.hostingpics.net/pics/617900IMG8979.jpg (http://www.hostingpics.net/viewer.php?id=617900IMG8979.jpg)
http://img15.hostingpics.net/pics/300683IMG8980.jpg (http://www.hostingpics.net/viewer.php?id=300683IMG8980.jpg)http://img15.hostingpics.net/pics/287774IMG8983.jpg (http://www.hostingpics.net/viewer.php?id=287774IMG8983.jpg)
http://img15.hostingpics.net/pics/893202IMG8981.jpg (http://www.hostingpics.net/viewer.php?id=893202IMG8981.jpg)
http://img15.hostingpics.net/pics/273788IMG8982.jpg (http://www.hostingpics.net/viewer.php?id=273788IMG8982.jpg)

[MOHCIN2]

i have do some effort to create a pinout see if its ok ; and can i read as XC2336B-24 or XC2336B-40 its the only mcu that have in package 64 pins in XPROG the other have 100 pins and have just two flashes 0 256Kb and 1 64kb that contain the crash data please help

[MOHCIN2]

i ask my self and answer my self in the same time here is the crash data thanks to mr smc14c for supporting me please check if the reading is ok because i read as sah XC236XA 72 here is the file 64KO need clear tested one because the car is far from me thanks

[FxShaw]

File Clear...

[repairmymodule]

Just clear the following 6 lines. 100%. However, like all Ford vehicles, the system will need codes cleared with a scan tool after collision. Particularly the Occupant Classification Module.
4A30, 4A40 & 4A50
50B0, 50C0, & 50D0

[MOHCIN2]

thanks friends its helpefull i'll try and report tomorrow

[smc14c]

Thanks for the credit, hope it works for you !

smc14c :)

[MOHCIN2]

DONT work five dtc can someone give me a tested solution

[repairmymodule]

Well what are the dtcs? That is tested. Many many times. The problem lies with your car or module from programmer.

The ONLY code that would change by editing those lines would be crash locked code. It's either still there or its not

[Abdo Abdelatif]

plese aide moi infineon ford c1bt 14321 BE413759

[Abdo Abdelatif]

CRASCH CLEAR

[meteor80]

You can clear crash using Autocom 2014.3 there is option to clear crash data without removing unit from car.

[Abdo Abdelatif]

THANKyou auto

[Abdo Abdelatif]

tanke you ms aouto

[tekknomove]

I have problems writing the file. I am using xprog 5.6.0 clone. the error appears in the verification after the device writes it. Then I read the memory and compare the file before recording and it has differences. Any idea that is happening?

[dav506900804]

hello how you read that by jtag??

[znakstop]

tekknomove (http://www.digital-kaos.co.uk/forums/member.php/531424-tekknomove)
This is normal, the processor restarts after writing and some addresses are rewritten automatically. Xprog does not have such a function that would not allow it to be done.