pasat b7 y2011 on how to set abs milage

[diga1]

hello
here i have passat b7y2011 and i wanna do quality milage job
i did cluster, dsg, erased statistic , dtcs, and there is still in abs old milage in channel 062,
is there any way to set this milage?


383880

[sendreq]

"Make 5 times tyre puncture then you will have new odo"

All credits goes to lupu_sandu :)

[H2Deetoo]

Can someone explain what this means exactly? I don't understand :(

[sendreq]

Mileage is coming from TPMS (tire pressure monitoring system)
if you will get flat tire 5 times (TPMS indicator have to signal it), then ABS will receive info with new mileage.

[diga1]

hello
today i tryed to do flat tire 5 times and nothing canged, then i tryed flat each tire once and nothing happened so i thing this wont do at this model
there must be another way

[sendreq]

there must be another way

My ideas are:
1. Flash ABS pump with VAS or VAGCANPRO
2. Change coding to zeros and then code it again to the car (Before you start to play with ABS coding, save your original coding)
3. Remove TPMS form coding , drive several miles and then code it back
4. Disconnect ABS pump for some time

I think point 2 in combination with 4 could help. After you put new coding, G85 along with other sensors need to be adjusted.

[diga1]

Hello. I tryed coding to zero and coding unit back and tryed unpluging it and wont help i read eprom from abs unit 95320 and found milage at one place rpited twice so i put ff and nohing helped so i think it might be in a flash.