passat b6 immo off needed

[erdilmen]

car is passat b6 with keyless remote
Ecu is med 9.5.10
dump is 95080
attached
B.regards

[kawaracing]

i try pass free

384887

[erdilmen]

i try pass free

384887
not worked ignition not opening and immoblizer adjustment active still on dash,no crank

[Rabiee]

her it working 100% and i wait reply

if worked and result Right don't forget give me Thanks + Repu Button

[haroutioun]

not worked ignition not opening and immoblizer adjustment active still on dash,no crank
Hello.
the immo off can't help the system (IMMOBILIZER) to open ignition or CRANK. you have problem or steering lock faulty or remote key or any data in area of comfort module damage.

[erdilmen]

Hello.
the immo off can't help the system (IMMOBILIZER) to open ignition or CRANK. you have problem or steering lock faulty or remote key or any data in area of comfort module damage.
how can i dedect where?

[haroutioun]

how can i dedect where?
Hello.
try auto-scan by vcds, and what kind tools you have for diagnos and to adapt? try re-adapt the key. battery voltage OK? let us how stop the car? give us more info to know help correct way.

[erdilmen]

Hello.
try auto-scan by vcds, and what kind tools you have for diagnos and to adapt? try re-adapt the key. battery voltage OK? let us how stop the car? give us more info to know help correct way.
car parked and not worked any more , battery is ok . i have fvdi and x431 diagun 2

[haroutioun]

Hello.
1) First read comfort module dump 95320 and save.
2) and try found vcds and re-adapt the key by turn on the switch of flash emegency, and activate the high beam light switch by press the brake switch when you try adapt the key. Don't use to adapt key by fvdi or 431X.

[erdilmen]

Hello.
1) First read comfort module dump 95320 and save.
2) and try found vcds and re-adapt the key by turn on the switch of flash emegency, and activate the high beam light switch by press the brake switch when you try adapt the key. Don't use to adapt key by fvdi or 431X.
at ours its 95640 here is the dump

[kiszka]

.............

[erdilmen]

385898

comfort module
year 2005.09
example number
3C0 959 433-xx
3c0 937049j
i will chech place where u marked,this was the number module which i read at dump

[erdilmen]

385898

comfort module
year 2005.09
example number
3C0 959 433-xx
here is odometer and bcm dump

[super jumbe]

You can hot wire the steering modul to start car, if you need it just say so.

[erdilmen]

You can hot wire the steering modul to start car, if you need it just say so.
how can i do that?

[super jumbe]

There you are just joint wires as in instruction.

[erdilmen]

There you are just joint wires as in instruction.
my car is not never opening steering lock and opening dash,only immoblizer active message..
As in the pdf i opened lock and checked limit switchs but they are work,ng,i dont understand anythink from four pdf because its not in english.
As i see there is a blue sth or you drawed a are near of limit switch.
is that a problem?
if you can expleain me i will be very happy.
Here is all my fault codes and dumps

[kiszka]

................

[erdilmen]

colleague if errors are only immo
this is not programmed key or damaged
I do not know if the properly programmed keys LAUNCH X431

VIN: WVWZZZ3CZ6E118787
PIN: 20690

C.S.B: 97 9B 59 BF 2F 36 B3

i will try with fvdi

[erdilmen]

i tried to create new key , now it seys key type ok but car still not opening ignition, i made short circuit from fuse box to open ignition...
here is pictures with original and with new keyhttp://uploads.tapatalk-cdn.com/20160722/f348f40a79803ecf27702d9c9814c3c2.jpghttp://uploads.tapatalk-cdn.com/20160722/b969ac6fd007f25e80c42094f400a0e7.jpg


Sent from my iPhone using Tapatalk

[erdilmen]

colleague if errors are only immo
this is not programmed key or damaged
I do not know if the properly programmed keys LAUNCH X431

VIN: WVWZZZ3CZ6E118787
PIN: 20690
C.S.B: 97 9B 59 BF 2F 36 B3

i send pictures , with new key it says key type ok but no start, no igniton.
new key is dealer key, also i tried all key lost but its stopping at dedectin engine type


Sent from my iPhone using Tapatalk