PDA

View Full Version : Renault mega DF226 P0120


Min2xx
5th July, 2016, 04:23 AM
Need help to remove TVA, flaps error and function. Error I can remove in DTC table, but cant remove function, and car still in limp mode
Car Renault Megane II, 1.9 DCI EDC16C36 2006 sw 395740
Min2xx
5th July, 2016, 11:47 AM
Any one can help?
Min2xx
5th July, 2016, 02:42 PM
No need free solution, I can pay for it!!!
kinketotua
5th July, 2016, 03:36 PM
here
unplug tva
--> 385059
Min2xx
5th July, 2016, 04:36 PM
Big thanks, but solution not work, after 2-3 starts limp mode and no errors. I tested this solution before. Not Ok
kinketotua
5th July, 2016, 04:48 PM
you unplug??
Min2xx
6th July, 2016, 07:34 AM
Ok, will check again tomorrow :)
Andr33iy98
8th January, 2022, 09:58 PM
Need help to remove TVA, flaps error and function. Error I can remove in DTC table, but cant remove function, and car still in limp mode
Car Renault Megane II, 1.9 DCI EDC16C36 2006 sw 395740
So, what causes your dtcs df226? It could be cars ecu dead?
Min2xx
8th January, 2022, 11:22 PM
No, it is TVA error, if car not start, maybe TVA stuck in closed position ?
Andr33iy98
9th January, 2022, 01:30 PM
it is open all the time.
Andr33iy98
9th January, 2022, 01:32 PM
If I buy a uch, engine ecu and a card key from the same donor car, car would start with no dtcs if engine ecu was the problem?
mapino
9th January, 2022, 02:13 PM
Need help to remove TVA, flaps error and function. Error I can remove in DTC table, but cant remove function, and car still in limp mode
Car Renault Megane II, 1.9 DCI EDC16C36 2006 sw 395740
Try this..

let me know if you have succes
Min2xx
9th January, 2022, 09:50 PM
If I buy a uch, engine ecu and a card key from the same donor car, car would start with no dtcs if engine ecu was the problem?
Seems ecu problem ...