CARPARTS
5th July, 2016, 10:06 PM
Hey,
I have SIMOS PCR2.1 what is locked.
Since few weeks, CMD changed the procedure to UNLOCK without RESET/BOOT/RESISTORS
Before the new procedure, it was never a problem to UNLOCK the PCR2.1
With the new procedure, its not working most of the time.
By OBDII i can read, but not write because of the LOCKED status.
VOLKSWAGEN
CADDY
1.6 TDI 55KW CAY CONTI PCR2.1 (needs unlock) CAN
CONTI PCR21 VAG CAN
++++++++++++++++++++++
Identification
++++++++++++++++++++++
CONTI PCR21 VAG CAN
++++++++++++++++++++++
CANBUS
Voltage: 12.2 V.
ECU STATUS: 0x00
ECU STATUS: LOCKED
ENGINE:CAYE
INFO:1,6l R4 CR td
INFO:EV_ECM16TDI02103L906023PA
VIN:WV1....
VAG:03L906023PA_8011
INFO:|SJ8-FST28.09.1100150391
Total time: 00:00:00 sec.
OK
i remove and connect ECU.
In my case i got message :
Error: 22 - No data from ECU
Cannot Check ECU Lock status.
ECU must be 100% working in order to read STATUS
If your ECU is damaged or not programmed, repair it with OBD or FRF flasher
Operation terminated by userError: 22 - No data from ECU
Cannot Check ECU Lock status.
ECU must be 100% working in order to read STATUS
If your ECU is damaged or not programmed, repair it with OBD or FRF flasher
Operation terminated by user.
In CMD there is NO option to REPAIR by OBD
QUESTION :
What is FRF file ???
and where i can find a "FRF" file for my car ???
(the car is still start and running )
Thanks for any idea's
I have SIMOS PCR2.1 what is locked.
Since few weeks, CMD changed the procedure to UNLOCK without RESET/BOOT/RESISTORS
Before the new procedure, it was never a problem to UNLOCK the PCR2.1
With the new procedure, its not working most of the time.
By OBDII i can read, but not write because of the LOCKED status.
VOLKSWAGEN
CADDY
1.6 TDI 55KW CAY CONTI PCR2.1 (needs unlock) CAN
CONTI PCR21 VAG CAN
++++++++++++++++++++++
Identification
++++++++++++++++++++++
CONTI PCR21 VAG CAN
++++++++++++++++++++++
CANBUS
Voltage: 12.2 V.
ECU STATUS: 0x00
ECU STATUS: LOCKED
ENGINE:CAYE
INFO:1,6l R4 CR td
INFO:EV_ECM16TDI02103L906023PA
VIN:WV1....
VAG:03L906023PA_8011
INFO:|SJ8-FST28.09.1100150391
Total time: 00:00:00 sec.
OK
i remove and connect ECU.
In my case i got message :
Error: 22 - No data from ECU
Cannot Check ECU Lock status.
ECU must be 100% working in order to read STATUS
If your ECU is damaged or not programmed, repair it with OBD or FRF flasher
Operation terminated by userError: 22 - No data from ECU
Cannot Check ECU Lock status.
ECU must be 100% working in order to read STATUS
If your ECU is damaged or not programmed, repair it with OBD or FRF flasher
Operation terminated by user.
In CMD there is NO option to REPAIR by OBD
QUESTION :
What is FRF file ???
and where i can find a "FRF" file for my car ???
(the car is still start and running )
Thanks for any idea's