PDA

View Full Version : this is a NOREAD file and has been encrypted EDC16U34



2.4jtd
6th July, 2016, 08:40 AM
been trying to tinker with my ecu for a while, but i knew it might not be easy as it was already remapped when i bought it, but i finally got around to reading it today with MPPS V16, but as expected its encrypted


i got the message "this is a NOREAD file and has been encrypted"


https://s31.postimg.org/kg7m5aei3/20160705_225308_001_1.jpg




ive done abit of googling and it sounds like it can be unencrypted but i have no idea where to even start with this


can it be done? and where is the first place i start looking?


i can share the file if needed but i cant seem to upload it at the minute


thanks

Babos
6th July, 2016, 09:08 AM
taka fgtech and try, or bdm help you.

2.4jtd
6th July, 2016, 09:21 AM
taka fgtech and try, or bdm help you.

which of these tools would you say is better?

Babos
6th July, 2016, 09:35 AM
obd is easy way

mario38
6th July, 2016, 09:59 AM
been trying to tinker with my ecu for a while, but i knew it might not be easy as it was already remapped when i bought it, but i finally got around to reading it today with MPPS V16, but as expected its encrypted


i got the message "this is a NOREAD file and has been encrypted"


https://s31.postimg.org/kg7m5aei3/20160705_225308_001_1.jpg




ive done abit of googling and it sounds like it can be unencrypted but i have no idea where to even start with this


can it be done? and where is the first place i start looking?


i can share the file if needed but i cant seem to upload it at the minute


thanks
if you did not have other tools to read this kind of ECU .. maybe you can read on the bench or on the options you select by pass wag and then read entire file

2.4jtd
6th July, 2016, 10:04 AM
obd is easy way

this was done by obd and it didnt help.... i need other solutions

bersch8688
6th July, 2016, 10:06 AM
Read by BDM!!!!

bobolin4o
6th July, 2016, 10:17 AM
this was done by obd and it didnt help.... i need other solutions

You need other tool...

2.4jtd
6th July, 2016, 11:42 AM
You need other tool...

like what tools???

tiugrikas
6th July, 2016, 01:43 PM
like bdm 100 , k tag , even xprog can do this job

2.4jtd
6th July, 2016, 05:23 PM
like bdm 100 , k tag , even xprog can do this job

oooooowwww :) i have xprog.... any chance you can show me how to read the ecu with xprog then?

tiugrikas
6th July, 2016, 08:56 PM
here you go http://carmasters.org/topic/295-bdm-%D0%B8-xprog-m/ you can do many ecus with xprog ! just one small problem reading and writing tooks longer than other tools but its normal !!!!!!!!!!!!!!!!!!! don't forget thanks button !!!!!!!!!!!!!!!!!

jakkeviet
6th July, 2016, 08:56 PM
like bdm 100 , k tag , even xprog can do this job

hi how you can open bdm100 readout if it is read protected?

tiugrikas
6th July, 2016, 09:02 PM
well I had read protected ecu edc16u34 but it was enable read trough obd ! but bdm worked fine so may work too .

dinohack
7th July, 2016, 07:15 AM
u can use mpps v12 with noread patch

Sent from my SM-G900F using Tapatalk

Mario3
7th July, 2016, 07:33 AM
If it has bdm readout protection desolder the flash and find a proper programmer and read it the good old fashioned way. No escape from this for the data ;)

Sent from my SM-N9208 using Tapatalk

2.4jtd
7th July, 2016, 08:27 AM
u can use mpps v12 with noread patch

Sent from my SM-G900F using Tapatalk

tell me more :)

dinohack
7th July, 2016, 08:29 AM
mpps v12 interface with noread patch for that program

Sent from my SM-G900F using Tapatalk

budG60
7th July, 2016, 09:04 PM
Try to find the text NO READ in the file and replace with FFFF.. Then you should be able to load it into your software to modify the file and program it.

supafly2
8th July, 2016, 06:37 AM
wont a galletto help to download the file,

CustomCars
8th July, 2016, 10:11 AM
Try to find the text NO READ in the file and replace with FFFF.. Then you should be able to load it into your software to modify the file and program it.

First he needed read it from car man ;)

In that situation u can look for exe to mpps what make bypass before read "protected" file.
Or like friends say, use other tool, BDM much more work, read should work by OBD
First try with xprogm and you can cooke your ECU

cristim
12th July, 2016, 05:58 AM
kess v2 or fgtech can do it by obd