PDA

View Full Version : Citroen C3 1,4 hdi DELPHI egr off



sasy90
6th July, 2016, 04:32 PM
Hi to all,

someone can help me to full egr off on this Citroen C3 1,4 hdi 66kw with Delphi DDCR.

I read ori file with newgenius (dimsport ) ori.

Thanks in advance


385287

sasy90
6th July, 2016, 05:35 PM
nobody can help mee?? Pleaseee

bobolin4o
6th July, 2016, 05:58 PM
Have limp mode?
Actually, have any troubles now, or just want to be closed?

sasy90
6th July, 2016, 06:58 PM
I want to close... my dealer is a mechanic and tell me to close egr ( i install also lamierino ) and egr off ... now the car start ok and run ok.... can you help me with egr off?

70max
6th July, 2016, 08:41 PM
I want to close... my dealer is a mechanic and tell me to close egr ( i install also lamierino ) and egr off ... now the car start ok and run ok.... can you help me with egr off?

Hello Friend,
Detach the connector you just turned on the engine indicator light,
Look in misdiagnosis laws and sends error code,

So remove it from the map error code

sasy90
7th July, 2016, 06:51 AM
For egr off on this car , need to delete onlt egr pxxxx code? The car rune fine? No problem in the future?

bobolin4o
7th July, 2016, 06:55 AM
Test it... blank, unplug... drive...
As i remember, there is not limp mode because of the EGR, but may wrong about...

sasy90
7th July, 2016, 07:06 AM
Ok i blank with lamierino , disconnect egr and drive... i will do a diag and report....

sasy90
7th July, 2016, 08:05 AM
i blanked it.... the car run fine without limp mode... is possible? I disconnect tube of depression also....

sasy90
7th July, 2016, 08:07 AM
only P0299 ( with texa idc4e) say me : boot under pression... infact the car no limp mode but not accelerate very well... i see in parameter and maf , when i full throttle , read 0! maybe also maf not work correctly... alright?