View Full Version : HELP!!!!! ECU RENAULT MASTER EDC16C36
ricmarins
6th July, 2016, 07:21 PM
A friend has the boot to read the ECU Renault EDC16c36 for BDM or XPROG???385316385317385318385319385320
a friend has the boot to read the ECU Renault EDC16c36 for BDM or XPROG
hcwc
6th July, 2016, 07:43 PM
Standard BDM connection like every EDC16
Use manual from your tool ;)
385323
ricmarins
6th July, 2016, 07:53 PM
THIS BOARD IS NOT THE SAME FRIEND
THIS BOARD IS NOT THE SAME FRIEND
ricmarins
6th July, 2016, 07:54 PM
THIS BOARD IS NOT THE STHIS BOARD IS NOT THE SAME FRIEND
THIS BOARD IS NOT THE SAME FRIENDTHIS BOARD IS NOT THE SAME FRIEND
ricmarins
6th July, 2016, 07:55 PM
YOU KNOW TELL ME IF I CAN READ THE XPROG ?
kospoz
6th July, 2016, 08:04 PM
THIS BOARD IS NOT THE STHIS BOARD IS NOT THE SAME FRIEND
THIS BOARD IS NOT THE SAME FRIENDTHIS BOARD IS NOT THE SAME FRIEND
What is your problem with the board my friend?edc16 bdm read with fgtech
ricmarins
6th July, 2016, 08:06 PM
THIS IS DEAD , NOTHING WORKS CAR , YOU KNOW IF YOU HOW TO READ WITH XPROG , OR IF THE BOOT FOR SWITCH ON OTHER PROGRAMMER
hcwc
6th July, 2016, 08:06 PM
Mate, I'm blind or you're blind ?
Board is not the same but bdm pads like in every edc16
Like i was thinking... if you have no experience/knowledge why you are starting job ? you bricked ecu.
If you have problem write one post, not 4 :]] All you need is to read xprog manual but i don't know if you still can read this ecu
ricmarins
6th July, 2016, 08:13 PM
The BOOT CONNECTION IS EQUAL FOR ALL ?
ricmarins
6th July, 2016, 08:21 PM
I AM STARTING IN ECU REPAIRSWORKING WITH DASHBOARD TO 20 YEARSI realized that this PROCESSOR ECU OF RENAULT MASTER EDC16C36 RIDING WITH A PROCESSOR MOTOROLA MPC5xx AM CORRECT ?
I AM STARTING IN ECU REPAIRSWORKING WITH DASHBOARD TO 20 YEARSI realized that this PROCESSOR ECU OF RENAULT MASTER EDC16C36 RIDING WITH A PROCESSOR MOTOROLA MPC5xx AM CORRECT ?
hcwc
6th July, 2016, 09:04 PM
I AM STARTING IN ECU REPAIRSWORKING WITH DASHBOARD TO 20 YEARSI realized that this PROCESSOR ECU OF RENAULT MASTER EDC16C36 RIDING WITH A PROCESSOR MOTOROLA MPC5xx AM CORRECT ?
I AM STARTING IN ECU REPAIRSWORKING WITH DASHBOARD TO 20 YEARSI realized that this PROCESSOR ECU OF RENAULT MASTER EDC16C36 RIDING WITH A PROCESSOR MOTOROLA MPC5xx AM CORRECT ?
correct...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.