PDA

View Full Version : Fiat Scudo 2.0 Edc15c2 immo



cristi_bv
7th July, 2016, 09:52 AM
Hello,i need a tested im*o off solution for Edc15c2 with 3 plugs.Here is orig eep and flash from ecu.

dragon100
7th July, 2016, 10:10 AM
Try and report, if you haven't got tested solutions.

cristi_bv
7th July, 2016, 10:13 AM
i have that file and it's not working.

dragon100
7th July, 2016, 10:17 AM
Maybe virgin file and reporogram ?

cristi_bv
7th July, 2016, 10:19 AM
I think it has a bad immobox so i don't have another solution than off.

dragon100
7th July, 2016, 10:20 AM
Do you disconnect immobox ?

cristi_bv
7th July, 2016, 10:24 AM
Yes,immo disconected and it keep's modifing the content of the eep.On first ignition no immo error code,but the car won't start and on second ignition cycle p1517 appears.

dragon100
7th July, 2016, 10:37 AM
Try this for eeprom and flash.

vlaki electric
7th July, 2016, 12:12 PM
Hello,i need a tested im*o off solution for Edc15c2 with 3 plugs.Here is orig eep and flash from ecu.
here immo off for you. write flash with programer not true obd. pass in pm
385455

cristi_bv
7th July, 2016, 06:45 PM
None of the solutions work.With both Dragon and Vlaki solutions there is P1517 present.

MOHCIN2
8th July, 2016, 02:38 AM
here is tested solution write both eeprom and flash dump good luck if not work buy a new ecu your ecu is faulty enjoy pass pm

vlaki electric
8th July, 2016, 06:09 AM
Bad ecu or something else problem on car.

cristi_bv
8th July, 2016, 01:27 PM
With Mohcin2 solution i have no communication with ecu.

MOHCIN2
8th July, 2016, 02:05 PM
YOU write it by obd i suppose you have to write it in boot mode or by programmer i always do that

cristi_bv
11th July, 2016, 08:21 AM
Still no luck,even with programmer,maybe chk wrong?

SergeyGrodnoBY
11th July, 2016, 09:25 AM
Still no luck,even with programmer,maybe chk wrong?
Maybe You need try only EEprom virgine and use FIAT IMMO EMULATOR?
Have you tried it?