PDA

View Full Version : ford fuel additive piezo problem



humax10
16th July, 2016, 02:14 PM
hi any help would be greatfull
i have a 1.6 tdci est focus with a fuel additive problem
the additive tank is full
there is a 3 wire plug that goes to the tank 1 is power for the pump 2 is earth 3 i would have thought would be from
the piezo level sensor
when i test ohms across earth and the piezo there is no continuity is this right or can i put a resitor in line to trick the system into thinking its full
cheers

Babos
16th July, 2016, 05:13 PM
try to do adaptacion ADD via diagnostic that can help you start work system.

humax10
16th July, 2016, 06:47 PM
getting it re mapped but thanks for the reply

hhp
17th July, 2016, 03:41 PM
Disconnect the right under the rear seat unit additives...