stachu22
18th July, 2016, 09:35 AM
Hello. I need to read code from this old radio - Audi Gamma cc 4D0 035 186. there is Motorola processor - 3C13W. Can I read it by Carprog? I can not find any info about it. Thanks
I found info that:
The 68HC11L6 is based on the 68HC11E9. 16K ROM, additional bidirectional port. Its fully static design allows operation at frequencies down to dc
So can i read L6 like a E9?
1 - Vss
2 - ODB (pull up from board)
17 - RESET
20 - PD0/RXD
21 - PD1/TXD
26 - VDD?
I know that it is secured so it will be cleared during reading eeprom. I need also new dump for it :)
I found info that:
The 68HC11L6 is based on the 68HC11E9. 16K ROM, additional bidirectional port. Its fully static design allows operation at frequencies down to dc
So can i read L6 like a E9?
1 - Vss
2 - ODB (pull up from board)
17 - RESET
20 - PD0/RXD
21 - PD1/TXD
26 - VDD?
I know that it is secured so it will be cleared during reading eeprom. I need also new dump for it :)