Renault Clio 1.2 16v 2001 IAW 5NR2.C2 - Immo OFF

[aqua_life]

Hello,
I have here Renault Clio 1.2 16v 2001 with ECU:
IAW 5NR2.C2
8200181482
8200254494

Can someone help me make Immo OFF ?

I read other threads in DK. I write a new file to eeprom 95160 and make all procedure to cut wire, etc, as shown in this thread:
http://www.digital-kaos.co.uk/forums/showthread.php/236948-Clio-1-2-IAW-5nr2-immo

But it don?t work with me.

Attached is the original file 95160 of my ECU.

Thanks for your help

[Ebie]

hi friend ,i had a renault yesterday that i immo off ecu was merelli 5nr c7 i have working immo off i use and a small modification on ecu power so the ecu does not learn the immo again

[aqua_life]

Yes, I have done that ECU power modification, but it don?t work.
I cut wire +12 Battery, pin L4.
Then, inside ECU I solder L4 and M4 together (+12 and Ignition).

[andy99]

And you need delete 95160 too

[aqua_life]

Problem solved. Thanks.
The 95160 file I wrote in ECU was ok.
My mistake was the starter. Because with this file car has no starter.
So, I just modified the starter relay and now the car starts fine and immo is OFF.

[mrchip]

Problem solved. Thanks.
The 95160 file I wrote in ECU was ok.
My mistake was the starter. Because with this file car has no starter.
So, I just modified the starter relay and now the car starts fine and immo is OFF.
Hi mate , which file did you use? and did you set eprom to in write protect ?
thanks