X5 2003 dash problems after calibration

[garabounga]

387389


Hallo Gays,

i really need help with this one i had a bmw x 5 to calibrate i deed dash en ews ews no problem dash stil give me some headache i change mileage with digiprog 3 so far no problem but when i put dash back the diesel needle stays on 0 with reserve light on,every thing else is working perfectly . because i readed with digiprog with no ftd chip couldnt save the dump on pc and no way to share it with you gays,what i deed is read eeprom with fvdi i dont khnow if its a good dump but im sure that some one could help with it or correct
the dump i want to post or give me a similar working dump where everything wil work. i really hope some where a dk member with the same car same sw version and same dump from fvdi :)

the car has 170321 km on dash now

its a bmw x 5 diesel 2003 3.0 d with wat I SAW ON DASH sw 17 M35080

i really hope that some one can help .

[garabounga]

Hallo guys no one??

do you need extra information maybe?

[hcip]

Hallo gays no one??

do you need extra information maybe?

I think "GAY" member not exist here, so they are not able to answer your question. most of them are GUYS and a MACHOMAN:)




do you have another programmer to read it directly on eeprom M35080?

[garabounga]

Oeps :)!!! I didnt rechek the spelling , thanx hcip .this car is making me crazy as i deed many bmw in the past .im pretty sure its not dash when i check the needles in the hidden menu every thing working good .i tyed today to do a scan lcm not responding .i khnow that when data is corrupt or vin /km info are incorrect I uselly get a dot next to the day trip wich i dont have now .idont khnow why is the lcm falty now and why the diesel needle stuck in empty . Im sure a BMW specialist in DK wil exlain that .
Thanks GUYS....

I can read the eeprom with the repsoft eraser but pretty sure its ok the fault not in dash.

[dominik.m]

You have eeprom from Ews. ???

[garabounga]

You have eeprom from Ews. ???

No i dont have that and dont need to change it in EWS, as the only back up in this car is in the LCM correct me if im wrong?

[dominik.m]

From Ews can copy the data to different good bin of dash.

[garabounga]

From Ews can copy the data to different good bin of dash.

THE DASH IS OK i wil try to read ews i dont khnow what you want to do with it?

[dominik.m]

I do not understand already this anything. Your post started with problem from dash!!!!

[hcip]

I do not understand already this anything. Your post started with problem from dash!!!!


He told that the only problem of a car is the FUEL LEVEL METER after correcting the mileage it goes to empty and Fuel light also glows. all functions are ok.

Note: He is not fluent in english language so please understand him.....

[garabounga]

He told that the only problem of a car is the FUEL LEVEL METER after correcting the mileage it goes to empty and Fuel light also glows. all functions are ok.

Note: He is not fluent in english language so please understand him.....

whose not fluent in english ?are you talking about me or dominik.m or bouth ? hhhhhhh

My next step is to check the fuses,of course i m stil open for all your suggestions and informations.

[garabounga]

I chekd all fuses its ok , when i make a IKE diagnose i have this message internal lcm fault .can the lcm have something to do with the fuel gauge ?
?
By the way i puted a similar tacho with same SW version same problem .

[diagtech]

Could be a fuel sender problem then

[garabounga]

Hhhhh its getting worst car is crancking and no start

[diagtech]

Car will start without cluster so i would look elsewhere or try putting fuel in might have run out if its cranking and not starting had that before

[garabounga]

Thanxs mate indeed run out of gas . i wil look verder to solve this problem,i want to thank every one who answer this thread of course i wil came back with a feedback when it solved.:)

[garabounga]

Here im back!! i solved it whats happens is that when you pull out the battery the LCM (some times looses its coding) no where in the BMW files speaks about fuel gauge failure if LCM looses coding, that what puts me in the wrong direction ,i coded the LCM again to the vehicle and everything is working again and the fuel gauge comes to life im really happy about it thanx again for your answers.

As far as im concerned this thread can be closed.

[rukartinatv]

Why not change file in epprom and see if will work?
just dont forget to change the vin in file.