View Full Version : Galletto v54 program close single
jack44
19th July, 2016, 07:21 PM
Hello friends,
galletto v54 program closes single.
many times work ok.
you have idea what happens?
OS win xp sp3
driver galletto ok
softvare gall v1.no ID hw nr.setup.exe
gall is china reworkit.
THENKS
dariobmw
19th July, 2016, 08:02 PM
What you mean ? the program no close the programmation ?
no checksum ?
no connection ramdomly ?
jack44
19th July, 2016, 08:36 PM
What you mean ? the program no close the programmation ?
no checksum ?
no connection ramdomly ?
look:
i tray to read obd ar table with power adapter and software go close single.
another time go super good
edc 15 p
draiver for galletto in windows ok
driver for edc 15 p ok
I fear to write mod file i scary when soft got close.
to brick ecu
is sw.or hw.problem
thenk you for replay
dariobmw
19th July, 2016, 08:54 PM
I think , (and is only my opinion) kan be software unstable , but you kan try on another PC if you kan and see if it is better .
jack44
19th July, 2016, 09:01 PM
i tray anther pc same problem
galletto hw is 0386
you have good soft without bugs?
thenks:)
dariobmw
20th July, 2016, 09:08 AM
No i think i have same chinese soft that they send from china , edited executable (if my memory is good) and at this
point i think is hardware problem for your galletto , is in any post here in kaos the files for renew it , but im not sure
if it is the solution for your problem
jack44
20th July, 2016, 07:49 PM
When closes
wobbling a little image for pc.
in galletto soft see 12,8 v
PierreTheron1
20th July, 2016, 08:08 PM
hi m8
this worked for me
do as this thread
http://www.digital-kaos.co.uk/forums/showthread.php/477215-FGTECH-GALLETTO-V54-FIX-EPT-HEX-DUMP-amp-PROGRAM-FOR-0475-AND-0386?highlight=fgtech+v54+fix
jack44
20th July, 2016, 09:13 PM
hi m8
this worked for me
do as this thread
http://www.digital-kaos.co.uk/forums/showthread.php/477215-FGTECH-GALLETTO-V54-FIX-EPT-HEX-DUMP-amp-PROGRAM-FOR-0475-AND-0386?highlight=fgtech+v54+fix
Thenks Pery
morgano
21st July, 2016, 08:24 AM
Try manually setting date to 01/01/2013 and running eobd2.exe also set max performance to energy profile.
jack44
21st July, 2016, 07:06 PM
thenks Morgano for reply.
this with set max performance to energy profile. good idea
i tray and reply
thenks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.