View Full Version : dpf off 1.6 tdi pcr2.1
leverage454
23rd July, 2016, 01:56 PM
heyy help me please i need dpf off for this car , it's a passat 1.6 TDI CAYC 2011
HW: CAYC
SW: 03L906023FS
VIN nr.: WVWZZZ3CZBP308950
SW ver.:
Spare:
Engine:
HW Ver.:
SW upg.: 03L906023FS 8356
Installation: 1,6l R4 CR td UNLOCKED
mariusica_boy
23rd July, 2016, 02:11 PM
Your file dpf off.
Pass PM.
leverage454
23rd July, 2016, 02:20 PM
thank you very much i will try and report
leverage454
23rd July, 2016, 02:25 PM
just finished now the dpf light still on , can you help me ?
mariusica_boy
23rd July, 2016, 02:42 PM
Mate, with file ori in ecu u need reset dpf particule, after that put my file.
Regards.
leverage454
23rd July, 2016, 02:43 PM
but i already did this !!
mariusica_boy
23rd July, 2016, 02:44 PM
What error du u have?
leverage454
23rd July, 2016, 02:46 PM
i got unknown error and dpf and injection light still on but i didn't got a dpf error
mariusica_boy
23rd July, 2016, 02:52 PM
Run the car for 5 km , must be ok.
leverage454
23rd July, 2016, 02:57 PM
ok i will try ;)
atayok
23rd July, 2016, 03:01 PM
dpf off %100 ok
try and report
leverage454
23rd July, 2016, 03:12 PM
ok i'm waiting for the car when it will be back i will try and report it will be in a few minutes
leverage454
23rd July, 2016, 03:15 PM
just one question bin file can be uploaded by kess no problem ?
mariusica_boy
23rd July, 2016, 03:39 PM
just one question bin file can be uploaded by kess no problem ?
yes , u can write with kess.
leverage454
23rd July, 2016, 03:42 PM
still the same thing car works ok but the dpf light still on and no more power on street without a default code of dpf when i read default codes
atayok
23rd July, 2016, 03:58 PM
TRY MY FILE
leverage454
23rd July, 2016, 04:06 PM
i did a diagnostic now i had a problem of temperature sensor 3 it's inside the dpf is this the source of the problem ?
leverage454
25th July, 2016, 10:07 AM
thanks guys both of files were good the prolem was in my car ( the temperature sensor inside the dpf ) i deleted it from ecu now everything is ok ;) thanks for all again
Kuncmaister
22nd October, 2018, 04:24 PM
Hello guys! Read simos pcr2.1 via kess dpf off via dpf remover and getting error after wtiting. Ive tried write back original file and works. Any ideas what could be wrong? Cheers
HIC
22nd October, 2018, 04:39 PM
DPF Remover not good solution
Kuncmaister
22nd October, 2018, 05:40 PM
I know but most of the time it work out. Iam not as good to edit it myself
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.