PDA

View Full Version : Help!!!



supafly2
23rd July, 2016, 05:51 PM
Ok I have flashed my ecu alot of times now but today it seemed to be all ok but when I turn dash on, management and service lights flash constant and wont swing, think I may have bricked it, its a bosch me1.5.5 what can I do, please please help.

jguerrasolana
23rd July, 2016, 10:34 PM
first, diagnostic and put DTC... then we see... thks

smirnoff_rules
23rd July, 2016, 10:37 PM
And tell us what u used to flash it , and all the info you have , car , engine , have you ori did you check software numbers etc.....

supafly2
24th July, 2016, 09:12 AM
Hi there, its an opel astra g coupe, 2lit turbo(z20let) used a galetto tool.software numers where the.same as I sent them the ori to modify.

smirnoff_rules
24th July, 2016, 09:15 AM
upload both files is the best then lads can see errors if there is some

supafly2
24th July, 2016, 11:32 AM
please see attached

jguerrasolana
24th July, 2016, 09:16 PM
ok, i will see and tell you, no problem mate.. a question, you modify the file, modify file its a tuning file?

mastaflex
24th July, 2016, 09:57 PM
have you tried to put original file ?

jguerrasolana
25th July, 2016, 11:30 AM
i guess no, how i see, that file tunning dont work... dashboard drive crazy.... boy put ori file back...
if what you want is that you review the tunning file, please ask for it

supafly2
28th July, 2016, 07:05 AM
ok I have tried but I get a sk1:-5 error

chiptorque
28th July, 2016, 08:02 AM
It has not recorded well, sure if you have one Kess tried to restore if not Boot mode,because you will not leave accessed by OBD