need full immo off peugeot 307 EDC15C2

[mahmoud bourgi]

hello need file full immo off peugeot 307 ecu edc15c2 3plug 29F400 AND 95P08 TESTED thanks

[mahmoud bourgi]

HELPPPPPPPPP

[miroslaw]

hi send file flash and eeprom

[mahmoud bourgi]

YES MY FRIEND FILE TESTED PLEASE I NEED CHANGE THE FILE COMPLETLY

[mahmoud bourgi]

helppppppppppp

[vlaki electric]

post the numbers of ecu. maybe use search buton to find ecu what you need. i am sure there is already file with off.

[mahmoud bourgi]

need to full flash and eeprom edc15C2 BOSCH O281010779

[vlaki electric]

what is with ori files? post them to modify....

[mvekaz]

You can find flash file all over internet, there are some here on DK forum, just use search button, and if you lazy as I am here is link:
http://www.digital-kaos.co.uk/forums/showthread.php/517597-Peugeot-307-EDC15C2-immo-off?highlight=0281010779

For eeprom 95p08 here is virgin one( see attach..).

Write flash and virgin eeprom in ecu and put ecu in the car.

I suppose that bsi is original with original pin code, if not, make bsi virgin,use lexia and telecoding, and write original pin for your car, not any pin, I repeat original one, so you can use your old key.If you haven"t original pin, ask somebody in peugeot service or here on DK forum to give you PIN over VIN number .
Now you have to telecoding ecu with lexia.
In lexia go to:
Spare parts
Injection
Replace ecu, choose motor type and ecu type( in your case it is edc15c2)
Write immo code ( you find over VIN)
Make telecoding with special attention on bsi type (multiplex or...)
Now is most important step, without this step you can not pairing bsi and ecu.
You have to add key.
After you add key make pairing bsi and ecu.
But most easy way is immo off, you have to send original ecu flash and eeprom here on forum.
Good luck.

[mahmoud bourgi]

NEED FULL FLASH 29F400 AND 95P08

[mizou40]

411589 try this and report