PDA

View Full Version : Ford Transit Hot start DCU101



Min2xx
27th July, 2016, 03:42 PM
It posible to add fuel at hot start, very difficulty engine starts after 60 C
Ford transit DCU101

dorofteius
27th July, 2016, 03:51 PM
Check injection system mate. It is not VAG.
Probably you have a problem with leaking injectors , pump, fuel regulator, or starter motor.

Min2xx
27th July, 2016, 04:02 PM
Injectors restored and have all testing dokuments :), fuel regulator replaced to new one, starter cranking with no problems, it have 2 batteries

dorofteius
27th July, 2016, 04:11 PM
Wach the rayl pressure when cranking.
Iff it takes allot off time to build, the go for the pump.
Never heard of hotstart software problems on any tipe of ford. ( In this case it is basicaly a Peugeot boxer ...)

gttuning
28th July, 2016, 08:15 AM
Check fuel rail pressure when van is hard to star.
No point replacing stuff if you dont know whats you problem.

Sent from my SM-G935F using Tapatalk

rob h
7th March, 2018, 09:47 AM
I have the same problem,
Peugeot boxer, 2.2hdi 2007 visteon DCU102 ecu.

Collegue exchanged many parts, still the problem remains. When hot, no start!

Could anyone fix this, if i uploaded the ecu file.

teamtuner
7th March, 2018, 10:27 AM
did you checked egr on real parameters if is closed or opened ?

rob h
7th March, 2018, 12:18 PM
No, i assumed that egr whas fine.
Can i use Delphi?
We will remove the egr, to be sure anyway.

Thank you!

dorofteius
7th March, 2018, 12:39 PM
On boxer check braided earth strap.
In live data what rpm do you see when crancking ?
What fuel pressure ?
Check all when the car is not starting.

rob h
7th March, 2018, 05:52 PM
I will check this out soon.
Thanks!