PDA

View Full Version : BMW E39 530d 184hp Galletto 1260 Read/no write - erase failure



b4mz3
31st July, 2016, 07:44 PM
Was trying to tune my car today, have read out the full file out of my ecu - about 512kb ish.

I can ecu ID and read the ecu, when i start to write the new tuned file i get the error:
Erasing...errore invio FORMAT2: -9
and
Erasing...errore invio FORMAT2: -5

Ps. The same error with the original file i read out before i did anything.

Can also read out the 48kb file with MPPS v13/16. Full ecu ID.

Now the car wont start. So im ~~~~ out of luck it seems..

What do i do? I flashed my other car with MPPS (525dat 2001) but this pre-facelift didnt want to use MPPS for some reason first.

Help me out guys, i need the car working:(

b4mz3
31st July, 2016, 08:27 PM
Bmw Vin Number : WBADP81080GS78952
Bmw Hardware Number : ???????
Bmw Software Number : 999999999
Bosch Hardware Number : 281001830
Bosch Software Number : 1037350667
Bmw Software Id : B079EWS3040014

I can still read out my ECU ID in MPPS. I just cant write the damn think even if i can read out the ecu. I really hope this is possible to fix:S

tiugrikas
31st July, 2016, 09:24 PM
i think something wrong with your tool . Try to install mpps on other pc and than try again

carbon7319
31st July, 2016, 09:26 PM
Yes you can , take out ecu try on bench , if no result remove flash and put on programmer.

b4mz3
31st July, 2016, 09:42 PM
This is read and tried writing with Galletto 1260. Read OK, ECU ID OK, Erase ERROR, Write ERROR. Problem is that the galletto reads out 512kb files and MPPS reads out 48kb files. I cant seem to write the 512kb files with MPPS, guess there is a reason for it:\

I know BMW can update everything with WinKFP, so as a absolute last resort i will flash the ECU with original updated software from BMW.

Gator
31st July, 2016, 09:49 PM
You should try in recovery mode with mpps or boot mode on bench if that dont work, or like carbon7319 said your last option is to desolder the flash and program on external programer. And dont try again with galetto 1260 it will brick the ecu again buy galetto v54 instead if you want to tune your car.

b4mz3
31st July, 2016, 10:28 PM
You should try in recovery mode with mpps or boot mode on bench if that dont work, or like carbon7319 said your last option is to desolder the flash and program on external programer. And dont try again with galetto 1260 it will brick the ecu again buy galetto v54 instead if you want to tune your car.

Is the Galletto v54 a better option?

tiugrikas
3rd August, 2016, 10:16 PM
yes galletto v54 or kess is good enough to this car !

b4mz3
3rd August, 2016, 11:50 PM
Have ordered Galletto v54. Cant seem to reflash my DDE, ISTA-P has it greyed out so i cant update it for some reason. WinKFP gets an error, it's strange tho as i can read out the hardware and softwaredata from the ecu. Kinda annoying i must say:\

jakkeviet
4th August, 2016, 08:12 AM
can you send read out file??

b4mz3
4th August, 2016, 12:16 PM
http://s000.tinyupload.com/index.php?file_id=54437783185877930664
This is the file that's read out of the car.

b4mz3
5th August, 2016, 01:21 AM
You should try in recovery mode with mpps or boot mode on bench if that dont work, or like carbon7319 said your last option is to desolder the flash and program on external programer. And dont try again with galetto 1260 it will brick the ecu again buy galetto v54 instead if you want to tune your car.

How do i get this in bootmode? Edc15c4, is it grounding pin#24 inside the case on the chip for 5sec on powerup? Connect the ecu to the car, ground the pin and then try mpps recovery?

b4mz3
6th August, 2016, 05:41 PM
Got the bootmode working and have flashed the ecu. Can read it now without problems. But now it has 0 kilometers on it and the ews is triggered. It even wanted out of the automatic life and went manual mode, what the fuxx? How do i fix this?

icezero2010
6th August, 2016, 07:06 PM
Got the bootmode working and have flashed the ecu. Can read it now without problems. But now it has 0 kilometers on it and the ews is triggered. It even wanted out of the automatic life and went manual mode, what the fuxx? How do i fix this?

you have kill the eeprom you need a virgin relearn with inpa

b4mz3
6th August, 2016, 07:12 PM
Seems like i just had to run BMWScanner and aligb the ews and delete some fault codes, and it started:) Love the smell of a dieselburner after a long week of headturning problems. Thanks all for the replies:)