AnixoR
1st August, 2016, 10:50 AM
Renault Megane 2.0 16v 1997 year need immo off solution
S103717102 c
HOM7700868206
I pay for it!
Maby is this ok?
Check engine pin-43
Immo pin-37
15- pin-24
30- pin-32
GND- pin 2 and 3
(1) If the memory is 27C512, then solder wire on pin22
If the memory is 28F512, then solder wire on pin23.
the other end of the wire connect to GND
(2) cut the wire to pin37 of the ECU.
(3) plug the ECU in the car and switch ingition for 30 sec.
(4) switch off the ignition, and disconnect the wire from the memory
27C/28F, and try to start the car.
(5) If the car does not start, turn on the ignition again for 30 sec., but this time connect the GND wire to pin 22/23 several times while the IGN is On
S103717102 c
HOM7700868206
I pay for it!
Maby is this ok?
Check engine pin-43
Immo pin-37
15- pin-24
30- pin-32
GND- pin 2 and 3
(1) If the memory is 27C512, then solder wire on pin22
If the memory is 28F512, then solder wire on pin23.
the other end of the wire connect to GND
(2) cut the wire to pin37 of the ECU.
(3) plug the ECU in the car and switch ingition for 30 sec.
(4) switch off the ignition, and disconnect the wire from the memory
27C/28F, and try to start the car.
(5) If the car does not start, turn on the ignition again for 30 sec., but this time connect the GND wire to pin 22/23 several times while the IGN is On