reset Bmw dpf with tool32

[Sbaumil]

How to reset BMW edc16c35 dpf using tool32? ive got emission error after dpf off file. File is 100% good

[tiugrikas]

post both files first

[gad3n]

file is not 100% good :)

[overs0ull]

if the file is good , you will not have any problem .
You can make this reset with the simple autocom ....

[Sbaumil]

ok. But what command in tool32 do this?

[immokill]

Hello,


Min.10l fuel in the tank
- COOLING WATER min. 75 degrees.
Load File DDE for your engine

- Select abgleich_csf_prog

- Add in argument LESTUNGSMANGEL
- Double click on "abgleich_csf_prog"

and even the parameters of a forced regeneration are set (new window appears, takes a few seconds).

close Tool32

The forced regeneration is only triggered if all parameters are correct. Then drive at 2500rpm .


Better use delphi it is easier

Regards

[Sbaumil]

This one forces regeneration. But what command in tool32 learns ecu that dpf is new?

[Sbaumil]

Also, car smokes white on iddle. Can it be wrong file problem? I bought it from respectable local tuner.

[bobolin4o]

White smoke not always mean regeneration...
In live data you can see is the regeneration active or not.

[kospoz]

If you have put in your tank some diesel cleaner product the car will have white smoke.I have seen a lot of vw cars with this situation