View Full Version : reset Bmw dpf with tool32
Sbaumil
2nd August, 2016, 03:08 PM
How to reset BMW edc16c35 dpf using tool32? ive got emission error after dpf off file. File is 100% good
tiugrikas
2nd August, 2016, 08:36 PM
post both files first
gad3n
2nd August, 2016, 08:37 PM
file is not 100% good :)
overs0ull
2nd August, 2016, 08:40 PM
if the file is good , you will not have any problem .
You can make this reset with the simple autocom ....
Sbaumil
3rd August, 2016, 09:51 AM
ok. But what command in tool32 do this?
immokill
3rd August, 2016, 10:45 AM
Hello,
Min.10l fuel in the tank
- COOLING WATER min. 75 degrees.
Load File DDE for your engine
- Select abgleich_csf_prog
- Add in argument LESTUNGSMANGEL
- Double click on "abgleich_csf_prog"
and even the parameters of a forced regeneration are set (new window appears, takes a few seconds).
close Tool32
The forced regeneration is only triggered if all parameters are correct. Then drive at 2500rpm .
Better use delphi it is easier
Regards
Sbaumil
12th October, 2016, 09:17 AM
This one forces regeneration. But what command in tool32 learns ecu that dpf is new?
Sbaumil
12th October, 2016, 09:43 AM
Also, car smokes white on iddle. Can it be wrong file problem? I bought it from respectable local tuner.
bobolin4o
12th October, 2016, 05:57 PM
White smoke not always mean regeneration...
In live data you can see is the regeneration active or not.
kospoz
12th October, 2016, 08:51 PM
If you have put in your tank some diesel cleaner product the car will have white smoke.I have seen a lot of vw cars with this situation
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.