change odo on BMW X6 with DigiProg 3 v. 4.94

[Linden07]

Hi everyone,

i want to change the clock on a bmw x6 year 2009 and i have the digiprog 3. Now, i've been reading that it could be dificult. Anyone can tell me how to do it? can it be done via odb2?

thanks

[optimaplus]

Dash out remove chip new chip and cas needs doing only orig digiprog will do cas

[Triniguy]

And if you have clone use r260 cas programer. Works fine, never had an issue

[koyot]

work via obd conector

[diagtech]

Only on some will cas go obd be prepared to remove

[XmoDDeR]

DOING CAS BY OBD IS NOT THE BEST WAY, USE ROSFAR SOLDER NO ISSUES DONE TONS

[Linden07]

Hi,
i?m a bit confused. some of you say that it works fine, others don?t.
Maybe it?s important to say that i have the digiprog 3 from china, not the original one. I understand that it works fine with Rosfar or other tools, but i only have the digiprog. Has anyone tried with the digiprog 3 from china and succeed?

Thanks...

[exe123]

In any case you need to open dash and remove eeprom or erase it with special programmer. This is not an OBD only job!

1) Do you have new m35080 eeprom so you can replace it?
yes? -> try it
no? -> 2)

2) Do you have a tool to erase the m35080 eeprom?
yes? -> try it
no? -> let somebody with experience do the job.

[brend]

9s12x Gold Programmer works cas 3 good to for cas,never had and issue to.What ebaut dash your dash have 080D0WQ EEP.,so you need eraiser programmer for this or new 080D0WQ EEP. or 35080 eep.

[ceni75]

r270 works fine and erese dash eeprom

[gogocro]

dont play with this if you havent tool....remove dash and cas and get somebody who have right tool 30 min job.

[electronicservicemate]

make cas3 with digiprog 3 over obd no problem, and dash take out and make by xprog m or r270

[divo]

Usualy I remove both and do with r270. Never have problem.

[alkaskad]

Friendly advice, don't do CAS via obd with china tools... You will never know what could happen. Especially with tools that don't have option to read and save...

[automotrizVIP]

Watching this thread. I'm interested since today I got a car today but it's 2016 model One of them is how is your process of modifying that car your mileage.
I read other threads and this car looks FEM
BMW X6 2016
452521

[electronicservicemate]

dash make with r270 and install can blocker in cluster for block fem module . good luck

[automotrizVIP]

dash make with r270 and install can blocker in cluster for block fem module . good luck

I see you have experience
BMW X6 2016
Could you please give me some more information on the subject.
Example :
Dashboard is tip mku eeprom ???
Cas ??
Others
Thank you

[Nicolas9]

You cannot do x6 2016 with r270, because the new type eeprom in dash cannot be erased..

[electronicservicemate]

I made x6 2015 with dash eeprom dq160 erase with r270 and fem modul block by can blocker install in cluster. I don t know what eeprom is in your cluster maybe new tipe you must open and look what you have good luck

[diagtech]

From 2016 bmw use new 35160 will bring tamper dot on unless you use a 35160 emulator

[automotrizVIP]

From 2016 bmw use new 35160 will bring tamper dot on unless you use a 35160 emulator
fem ?? mku, pin, eeprom, mask security etc...
A little more information please

[diagtech]

The eeprom in dash is a 35160 which needs an emulator to stop tamper dot coming on you will also need to do bdc by installing can filter in cluster or bdc module

[automotrizVIP]

I see, you have to emulat the board so you do not have communication with the FEM module
THE SUGGESTION IS GOOD, BUT IT IS LACK OF THIS COMPONENT.
I HAVE TO DO IT CORRECTLY.
I have also seen that if this FEM modulo, it is wrong the car is dead.

[diagtech]

Ok you must be right but it is definitely bdc module and the emulator is just for the eeprom not bdc you need a blocker for bdc dont ask for advice if you know better

[automotrizVIP]

I thought that this car could be made of the shape of a bench.but it is not possible
Some have been able to do with "original arbiters, others", by taking obd2?
Without this car getting damaged?