View Full Version : Fiat Grande Punto Abarth 1.4T ME 7.910 wrong size file read by galletto...

3rd August, 2016, 11:53 PM
Hello Mates,

I read flash and STxxx content from Fiat Abarth GP 1.4T, after such modification to compare with ori, but galletto made file with such (virtual r/w) size, 896kb.... Ori as I have, all from ME7.910 size is 832kb... How to cut dummy area and decrase data to orginal format?? Galletto has such option, or only manual sulution???

Best Regards, ori and 896kb mod below....


4th August, 2016, 06:57 AM
open an editor hex, charge 896 kb file, select from address 8000 to address 18000, cut, save, finish

30th August, 2016, 08:25 PM
Hello. I cut that part of first readout and compare to few ori abarth and fiat gp mjet files. The result - i read dump the same as fiat gp 1.4mjet 120HP... I cant believe, car should have 155HP, but readout the same as ori 120HP... (ecu number and map content identical, even cks!).

I compare maps with abart 155HP and only one map (ignition advance) was different.. I don't understand it, today i test car on dyno and result is - 166HP 270Nm! How it possible and do you think such mecanical change (i.e in westgate turbo) coud done? I bought car and feel good performance, but readout shows me software is ori... Please help me to discover what's going on.

Best regards.

31st August, 2016, 08:18 AM
if you read bye obd galletto read at virtual read, you have forever ory file becouse galletto dont read real the ecu but download file from pc ore server.
to read real ecu file need to open it and read stxx inside.

31st August, 2016, 01:16 PM
Even read by boot galleto will give you 896Kb.

If you change WG actuator ECU will lower pressure to achieve specified torque in file. In Brazil the 152cv files make 148cv on dino