peugeot 307 change mileage

[aaruncee]

Hi,

I tried change mileage with Nyo 4.0 in bsi but not successfully. After changing i wait 10min but show old value.

Peugot 307 diesel (MY2002)
bsi:
plan 9636760580
valeo bsi gox-00
variante: B
memory mc68hc912dg128
bsi ver. v3

Original mileage: 260982
changed with Nyo4: 125211

can anyone help me change mileage?

[maglaras]

YOU MUST READ AND THE BSI

[sixpack]

Hi,

I tried change mileage with Nyo 4.0 in bsi but not successfully. After changing i wait 10min but show old value.

Peugot 307 diesel (MY2002)
bsi:
plan 9636760580
valeo bsi gox-00
variante: B
memory mc68hc912dg128
bsi ver. v3

Original mileage: 260982
changed with Nyo4: 125211

can anyone help me change mileage?

you must also change the mileage in the instrument cluster
not only BSI

[aaruncee]

you must also change the mileage in the instrument cluster
not only BSI

Maybe do you now whom chip i must read in dash? thanks

[sixpack]

Maybe do you now whom chip i must read in dash? thanks

I think it's Chip 95020
read it and post the dump

[aaruncee]

I think it's Chip 95020
read it and post the dump


I found just one 8pin chip 4949ED others 16pin:
alcatel 2840
0219 REMX-NDC
PSA
----------------------
Philips
74HC595D
AA40701
Onn0217 D
-----------
TSS436
0218 42418C

---------------
and big one:
SAgem
21 660 041-5
BZ1012
0214M8021

[sixpack]

read the 8pin chip 4949ED

[aaruncee]

read the 8pin chip 4949ED

read 4949ED like 95020? thanks

[sixpack]

read 4949ED like 95020? thanks
from what i now see this is a voltage regulator

I'm not sure witch one of the other two you must have then, maybe a other member have an idea?

[lupu_sandu]

4949ED is a voltage regulator.
You need to read SAgem. Your dash is NEC.
Cheers.

[aaruncee]

from what i now see this is a voltage regulator

I'm not sure witch one of the other two you must have then, maybe a other member have an idea?

others members told to do this procedure but nothing happen:
Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage . Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash.

[aaruncee]

What mean "just power on the dash" in this instruction? I must find which pin is plus and power this pin? If i just turn on acc i can't see any value in the dash.


Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash.
thanks

[PremierD]

Had one of these in a couple off days ago.. Did'nt matter what I did the mileage would not Alter (and Ive done dozens of them ).Untill I edited the Km's into the BSI.. and the same into the NEC in the dash... Which worked ..

[aaruncee]

Had one of these in a couple off days ago.. Did'nt matter what I did the mileage would not Alter (and Ive done dozens of them ).Untill I edited the Km's into the BSI.. and the same into the NEC in the dash... Which worked ..

Which NEC mcu is if on chip written:
Sagem 21 660 041-5
BZ1012
0214M 8021

I'll try read it with upa-usb

[marcosbgarcia]

hello, my friend, save this file in bsi and let the instrument panel with the original file
tell me if it worked, I do all 307 2002 and 2003 as well.

[PremierD]

Which NEC mcu is if on chip written:
Sagem 21 660 041-5
BZ1012
0214M 8021

I'll try read it with upa-usb

Thats the one mate.....You can only read it with UPA .if you remove it and have the adapter board ...I use ETL...

[aaruncee]

hello, my friend, save this file in bsi and let the instrument panel with the original file
tell me if it worked, I do all 307 2002 and 2003 as well.


Thanks Marcosbgarcia, problem solved with your dump, you are very good mate :bounce::bounce:

[geobxl]

Hello. i have tried to download .rar files and it is not possible. I have a white page open and no file to download. Actualy i try to download these files for a peugeot 206; did it work ?
Thanx.

[stevan]

NYO is not good calculate 307 with 912 mcu.

[Motika]

Hi, i'm a newbie and i want to try and change the milieage my partners 307. What tools or programmers do i require for the job.

[cammy25]

You must program NEC uPD in Dash + BSI. Else it will correct itself to old milage.
NEC can be programmed with Diga, NEC programmer ETL, Xprog-M, UPA or any professional tacho tool.
Its possible to program it In Circuit with 14 wires.
Beware, it can have 3 differnt calculations in NEC.
If you Car is a HDI, then you should also change sevicelist in ECU EDC15

[stevan]

If 307 is -2002 than you need only 912 prog.

[Motika]

Thanks all for the above, have just been looking at the prices of the recommended tools and noticed that they are bit dear for a one off job and i think its cheaper if i pay the 40quid or so to get someone to id.
Is there anyone who can do this for me? I live in the Yorkshire region and the its a 2003 petrol 1.4ltr

[stevan]

Well,2003 is not so easy like -2002.Dash also need to be programmed.To pay someone to do it is a good solution.There are lot of members from GB here someone will contact you i hope.

[harunkor]

thanks many

[harunkor]

this form ı not download

[bytzah]

Hi,

I tried change mileage with Nyo 4.0 in bsi but not successfully. After changing i wait 10min but show old value.

Peugot 307 diesel (MY2002)
bsi:
plan 9636760580
valeo bsi gox-00
variante: B
memory mc68hc912dg128
bsi ver. v3

Original mileage: 260982
changed with Nyo4: 125211

[episcop]

Post dumps...

[hrag]

dear frend
needed original clear 307 BSI Bin file

[hrag]

hi
needed original clear 307 BSI Bin file

[hrag]

dear
need clear bin 95128 for 307 2007 model KM 0
thanks in advance

[PremierD]

dear
need clear bin 95128 for 307 2007 model KM 0
thanks in advance

Not that easy mate ..without the Dump ... Post it Along with what it reads ...

[hrag]

dear
1- need to read 95128 BSI & change Millage by Licznik yes?
2-need to read 95020 from dashboard also & Millage by Licznik yes?
please advice

[PremierD]

dear
1- need to read 95128 BSI & change Millage by Licznik yes?
2-need to read 95020 from dashboard also & Millage by Licznik yes?
please advice

You need to read both BSI and Dash ... And post the dumps ....Or do as you suggested ....

[tordu]

How to connect dash without bsi ?

[tordu]

I cannot upload the dump, why ?

[tordu]

hello, my friend, save this file in bsi and let the instrument panel with the original file
tell me if it worked, I do all 307 2002 and 2003 as well.

with what soft did you do it ?

[tordu]

Can someone repost the dump of marcosbgarcia
thanks a lot

[gselectric]

please can u post the st 95128 dump please in bsi because i really need it

[jaroSK]

Hi,
may somebody confirm me next :?
BSI Valeo with 912dg128 if it's year 2002 it's enough only calculate & rewrite new value in BSI, without any changes in dash&NEC mcu ? dash will update from BSI ?
Thanks

[jarog]

read nec mcu with etl programer, usb upa or diga.....
send dump....

jaro

[jaroSK]

NYO is not good calculate 307 with 912 mcu.
if NYO is not good, what is good calculator for P307 ? I have dump from BSI, NYO show that is version2, is this version calculate correct ?

[tigertowing]

Hi all, hope to find if one of you can sort my problem out, i have a repaired accident damaged 2003 307, in the accident the airbags fired, this caused the mileage to like jump
9i have been told its the voltage increase, i need it to be reset to original mileage, i have paperwork with original mileage, also i am in Australia but can ship anywhere to sort, i have a tachpro clone but not good enough to do it myself, i use mainly for obd applications. i can send BSI and cluster! thanks in advance, looking forward to a reply

Andy

[tigertowing]

Hello again i have fitted a bsi out of another vihicle, i have no mached speedo, anyone can reset my speedo to 0 so it can follow the new bso mileage? i can post circuit board out to you,

thanks

Andy

[16 valvulas]

first change bsi


down load tacho soft if not i will sen it to you





Hi,

I tried change mileage with Nyo 4.0 in bsi but not successfully. After changing i wait 10min but show old value.

Peugot 307 diesel (MY2002)
bsi:
plan 9636760580
valeo bsi gox-00
variante: B
memory mc68hc912dg128
bsi ver. v3

Original mileage: 260982
changed with Nyo4: 125211

can anyone help me change mileage?

[boydy1985]

read dump mate then reprogram

[MECAABDO]

read bsi only without dash
remove bsi after turn the key the dash is 0 that is in tachosoft instruction

[Shmortz]

i did everything in the instructions but mileage didn't change here is the BSI dumps the old value is 203062, please help me to change the mileage, I don't know what I'm doing wrong.

When I power up the tacho there was nothing on the display

[Ramzai]

i did everything in the instructions but mileage didn't change here is the BSI dumps the old value is 203062, please help me to change the mileage, I don't know what I'm doing wrong.

When I power up the tacho there was nothing on the display

P307 BSI Valeo 9636760580 C 912DG128 127300 - Try.

[Shmortz]

you are sending me almost the same dump as mine m8, i think that the problem is in dashboard, how will i know that he is reset after powering on

P.P. the dash cannot be powered on in the vehicle without the BSI, he is taking supply from the BSI, i powered him on the desk, pin 6 VCC, pin 16 GND

help me to do it without reprogram the dash please

where can I find the software you are using in that picture?

[vageric]

selfmade upa script.

[technobox]

how to read 912 bsi 307 hdi 2003 model
pls send pictures

[Shmortz]

I did it, changed the odometer value and reset BSI



how to read 912 bsi 307 hdi 2003 model
pls send pictures

look page 7 in the pdf file

http://www.digital-kaos.co.uk/forums/f175/307-bsi-problem-121860/#post614467

[hakancpu]

hello do you still have this file?