Fortuner 89661-OKS10 immo off

[maremuruk]

Hi all,

A client came with a 2011 ex totaled Fortuner, he strongly stated that car's key was lost in that accident, he made a duplicate key for it and since then the cars never starts. I have checked, the key has 72G in it. Everthing else is fine, but car still won't start. My diagnostics tools showed no immo DTC, now i'm lost..
Since i don't have enough knowledge to do checking on below dumps (....yet :biggrin:) please help me check them and kindly let me know what causing problems.

391769
391770
Key :
P1 36
P2 A6
P3 A6 34 CC 80
P4 00 00 00 00


Any kind of help will be appreciated.

best wishes,
Maremuruk

[electrones]

Here m8 try and report
I think u have made mistake in naming your file zip, u have change it
Write this dump in your ECU, with your immobox disconnect

Cheers

[maremuruk]

Ahhh electrones, thanks for heading up, yes my mistake in naming the dumps. Sleepy and desperate...lol... but, you light my day again, mate.
Surely i'll give you report after i tried it, as fast as i could.
Thanks again, mate.

[maremuruk]

Electrones, unfortunately car still won't start.

[gjenkins0]

is the immobilizer light on with the immobilizer box connected an key in ignition ? maybe your problem lies elsewhere.Use techstream to read error codes on engine

[maremuruk]

is the immobilizer light on with the immobilizer box connected an key in ignition ? maybe your problem lies elsewhere.Use techstream to read error codes on engine

is the immobilizer light on with the immobilizer box connected an key in ignition ? maybe your problem lies elsewhere.Use techstream to read error codes on engine
hello, thanks for your concern, here are the details of my working :
1. I found no immo DTC at PCM scanning, i used VCS since i don't have Techstream. But security indicator was blinking with or without a key in.
2. I made a immo off based on electrones's files and write it on Fairchild c86. Tried it with immobox disconnected but the car won't even crank. I tried to jumper the start relay, car was cranking but won't start.
3. Immediatly i switched the Fairchild c86 to the car's original rh86 and connected the immobox again, I have made a virgin (from another respected DK member) before i reconnected immobox. After this action security light was on and i immediatly turn the key on and off 5 times then lights go off. I started the car but still it won't even crank. How silly i was, I forgot to connect the remote control module ! :02.47-tranquillity: After reconnecting remote module car was cranking but still no start, but this time security light was behaving normally and no blink when key is in. Honestly, it broke my heart.... Car should start just like that whenever security lights behaves normally... or no ???
4. After step 3 above i scanned car, found no DTC at immo section, but found a 2799 at engine section.
5. I disconnect again the immobox and put back the c86 immo off. This time the engine was kicking once, but decide not to start. Scanning again and this time i found dtc EEPROM ERROR, and many other dtc faults. One of them was INJECTOR QuANTITY ERROR (or sort of it, i forgot....)
That's the story and after it i was pretty convince the electrone's immo off was correct proved by engine that was willing to kick once. I was trying to write the original rh86 but unfortunately xprog didn't recognize this ic. So i'm stuck because it's the only device i have. The best solution i can think of is virginizing immo.

And it's better to notice that this is my first on immo work.
I appreciate all concern and help given in understanding deeper about this immobilizer thing.


Cheers

[gjenkins0]

I have a Virgin file for this car

Sent from my D2533 using Tapatalk

[maremuruk]

Then i will gladly take it if you would kindly send me
Thanks in advance, mate

[gjenkins0]

Here is the virgin dump for the G key. Load it on to the immo box, bridge pins to virginize ecu.

[gjenkins0]

make sure you write your files in 16bit,if you need an immo off tested solution which i have used on various fortuner's you can skype me *Removed Skype Details...

[maremuruk]

thanks a lot mate, i'll give it a shot and report progress.