Ford Torneo Connect 1.8TDCi 90hp SID206 FAP off

[phl0at]

Hello guys. I have already disabled the FAP and the DTCs but the regeneration starts randomly again and car smokes a lot. Later i've managed to find post-injection maps and MAYBE disabled them but not sure about it. Can someone check the file i've made and tell me if there is something wrong about it?
Thank you in advance!

These are the files read by OBD:

392432

392431

[nizarben]

hi
poste original file

[phl0at]

Hi, it is posted in the first post. Thank you!

[autotuning]

Hi did you complete the regeneration process that had automatically begun before you wrote your file?
if the car has not seen a completed regeneration or a reset it will randomly attempt to complete the process forever of course you can fastrack all of this by just programming a new one has been fitted.

[phl0at]

Thank you, I will try that also today :)

[phl0at]

Tried to reset the DPF but the smoke comes randomly again. Any other suggestions?

[ugndz]

IF I WERE YOU I WOULD PUT ORIGINAL FILE AND RESET THE DPF SENSORS ANDA ALL RELATED VALUES ON IDS THEN START THE CAR CHECK IT ON COLD AND HOT START AND SEE IF ITS GOING TO SMOKE. IF IT SMOKES THEN ITS LIKELY TO BE ANOTHER PROBLEM SUCH AS BAD FUEL INJECTOR ETC..

[phl0at]

The injectors are ok. The car smokes only when hot and driven for about 10 minutes. Tried 3 files already and the result is always the same. Disconnected sensors and still the same. Reset all the settings even the MAF but it still smokes randomly. I don't have any oher ideas so i count on you guys.

[phl0at]

I found the solution for sid206/sid202. The problem were the post-injection maps. There are several of them and all of them need to be FA'd ;) if anyone needs the solution, I can share.
Thank you all that helped!