Peugeot Partner 2.0HDI SID801 - EGRoff problem

[vopi]

Hi, I tried to make EGRoff in SID801 but still have some problem.
I made modification with setting of one area to zero but car has problem with this mod. After that I found information that is necessary to disconnect solenoid valve which control EGR. After that car works fine without limp mode but in the ECU is new DTC P2143 from solenoid :mad-new:

please, is it possible to make EGRoff on this ECU without DTC in ECU?
I attached original + mod.
thanks

[vopi]

no experience with this ECU and EGRoff??

[gitko]

even you remove DTC soon car will be back to you with the same problem

[vopi]

even you remove DTC soon car will be back to you with the same problem

OK but is there any solution which is work with SID801 and solenoid connected?

[gitko]

The best solutions are with disconnect sensors. Can make it with solenoid off


Sent from my iPhone using Tapatalk

[vopi]

which sensors?

[bobolin4o]

Hi, I tried to make EGRoff in SID801 but still have some problem.
I made modification with setting of one area to zero but car has problem with this mod. After that I found information that is necessary to disconnect solenoid valve which control EGR. After that car works fine without limp mode but in the ECU is new DTC P2143 from solenoid :mad-new:

please, is it possible to make EGRoff on this ECU without DTC in ECU?
I attached original + mod.
thanks


Here is your file.
Checksum is ok.
Regards!

[vopi]

thanks, I will test it soon