Swapping cas cause DSC and abs light to stay on. PLEASE HELP

[MonSter911]

Hi dk

Any help will be greatly appreciated.

I added key to cas module of a bmw e87 1 series.

I wanted to see if it works so i asked a friend if i could try it on his e92 M3. Adding the key worked.

So i put the original cas of m3 back. Now car starts but dsc and abs light staying on. The fault codes im getting from the dsc is :

Hydraulic unit :adjustment,dsc values. The car had no faults prior to pluging in the other cas.

Please help

[MonSter911]

Apparently dsc needs to be calibrated. How to do it ?

[simaservis1108]

INPA and calibrate valves,happens when you put modules of other VIN to car.

[MonSter911]

So how do i go about fixing it ? All i have is fvdi for bmw.

[bearheroes]

Fvdi impossible...
Inpa, dis or insta D can do the job.

[MonSter911]

Fvdi does nothing when tryin to recalibrate.Thanx guys will look into it.

[luis12]

Its normal that this lights turns on when you conect another car CAS, you need to make a valves calibration and steering angle sensor alignement some times you need to reconfigure ABS options, it is made with INPA in Service Funtions.

[MonSter911]

Bump : just a quick question, i have noticed something on the m3 dsc module. Fvdi doesnt show operating software x.x.x . Can anybody confirm to see if this is normal ? When i select coding and try to read properties of dsc i got no coding index appears. Can anyone confirm if this is normal spec of vehicle is 2008 bmw m3 e92 or if i can use dsc coding from another m3 same spec ?

[bearheroes]

I think you got answer of what is needed...trying these ways due to lack of tools i think won't help. If you can't do it go to a dealer and he will do it in 5 minutes.


Sent from my iPhone using Tapatalk

[MonSter911]

Ok thanx appreciated.