probleme kenwood dnx4210bt

[bravel digital]

hi guys i need help I have the same problem with kenwood dnx4210bt

https://www.youtube.com/watch?v=9StMl0Au_RM


somebody has a solution please

thanks advanc

[juisro]

Hi , try update software


http://www.kenwood.eu/up_2_date/car/multimedia/dnx4210bt/

[bravel digital]

hi thanks for help I have try the update software how I could start the update
392965
http://www.kenwood.com/cs/ce/mm/firmware/2012/2012b/pdf/12DNXmid_FWupdate_fr.pdf

http://www.kenwood.com/cs/ce/mm/firmware/2012/2012b/pdf/12DNXmid_FWupdate_en.pdf


sorry

[juisro]

Hello, you have to look how to do it, and reload the firmware

http://www.kenwood.com/cs/ce/mm/firmware/2012/2012b/eng.html

[bravel digital]

I downloaded the file problem is how to start usb

[juisro]

Friend thanked aid? as you want to be if not grateful, you only show more problems.

[bravel digital]

thank you for you help

[bravel digital]

I have not yet found the solution I think I have a problem with usb cable thank for reply

[bravel digital]

hello guys someone a solution for my problem

thanks advance

[seba08121978]

Hello, I have the same problem, you have a solution buddy?

[soimu]

you need to reprogram TC58NVG1S3 TSOP-48

[Rollypolly]

SD card Problem!!

[seba08121978]

Hi guys, it is this: usb does not start, I can not enable service manu buttons, SD card disconnected there is garmin, in the middle of the motherboard such as on this page http://4pda.ru/forum/lofiversion/index.php?t87973 -200.html x89-3100-10 as soft write it again?

[seba08121978]

http://4pda.ru/forum/lofiversion/index.php?t87973-200.html correct link

[soimu]

what problems with sd card ? not detected ?

[seba08121978]

hia, sd card plugged and unplugged from the socket, there is only garmin data in a device appears only boot screen a few seconds and restart as video at the top of the page. you can not do anything, anyone know a solution

[soimu]

Check the sd card . sd card features 2 partitions - 1 partition It has 30kb , 2 partitions it has 3.6gb
partitions you will see in the program -MiniTool Partition Wizard-

[seba08121978]

I did not see this partition, only the one with the garmin ,is hidden, you can send me to change? :excitement:

[soimu]

partition 1 correctly visible , partition 2 invisible
you need to reprogram nand TC58NVG1S3 TSOP-48
For this we need have a good programmer and file

[seba08121978]

there is no TC58NVG1S3 see photo motherboard on the previous page, you can send data from the sd card?

[soimu]

Strange that you did not see
SD CARD https://mega.nz/#!c1FjgRAa!ll92cB-iCCBAxfij8m3-OwRIEXhsuLGYxJMgmORiGkQ

[seba08121978]

soimu is right at the back of the motherboard is TC58NVG1S3 TSOP-48, today the exchange of files SD card, and does not help I need is a program TC58NVG1S3 TSOP-48, what data to load TC58NVG1S3 TSOP-48 soimu? Thank you