Peugeot 308 2010, not fully working Dash after EEPROM correction

[niripas]

Hi all. Something strange happened. I got a 308 with 195668 km, changed BSI with dash disconnected to 120121km using SMOK, changed 95040 first 16 bytes using the rule distance*10 > hex, rotated. After plugging the dash back, there is no backlight, needles are getting the jolt from powering up, but are not showing revs, speed or fuel. Mileage is diplayed correctly (however without backlight). Indicators are working. What went wrong?

please see original and changed eeprom dumps.
393048

[MRRAMI]

original dump 308 2010 120121 km393055

[niripas]

MMRAMI Can I just write that dump into EEPROM and install the dash? Or will I have something to adjust with Lexia?

[Dr. Zoidberg]

Hi all. Something strange happened. I got a 308 with 195668 km, changed BSI with dash disconnected to 120121km using SMOK, changed 95040 first 16 bytes using the rule distance*10 > hex, rotated. After plugging the dash back, there is no backlight, needles are getting the jolt from powering up, but are not showing revs, speed or fuel. Mileage is diplayed correctly (however without backlight). Indicators are working. What went wrong?

please see original and changed eeprom dumps.
393048

How calculate bsi???

[diagtech]

You can just put that dump in your dash

[Freezzby]

Hi ,put back original dump and see if works .