View Full Version : EDC17CP04 EGR OFF
Dimpo
20th August, 2016, 03:28 PM
Hi, i have trouble with EGR. Cannot find EGR hysteresis maps in EDC17 correctly. I have P0403 Error and limp mode. http://www.ecuconnections.com/forum/images/smilies/icon_cry.gif
I try to zero maps
25x1 @ 1C02A8
25x1 @ 1C0334
25x1 @ 1C0334
I Try vith volta, It does zero 8x1 maps after 25x1. and 25x1 too.
Both soutions didn't work. http://www.ecuconnections.com/forum/images/smilies/icon_neutral.gif
Car goes from Latvia to Germany tomorrow, help please with correct solution.
4L0907401A
soft 518178393367
Dimpo
20th August, 2016, 03:30 PM
I will try to zero other maps like 1C02A8 25x1
1C02EC 8x1
1C0334 25x1
1C0378 8x1
1C039A 25x1
1C03DE 8x1
1C0422 8x1
1C0444 8x1
but not sucessed
001027 - EGR Valve (N18)
P0403 - 000 - Malfunction - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: 221231 km
Time Indication: 0
Date: 2016.08.20
Time: 15:32:45
Freeze Frame:
RPM: 777 /min
Speed: 0.0 km/h
Load: 0.0 %
Duty Cycle: 99.6 %
Lambda: -20.3 %
Mass Air / Rev.: 487.6 mg/str
Temperature: 46.8?C
and limp mode. http://www.ecuconnections.com/forum/images/smilies/icon_e_sad.gif
Dimpo
20th August, 2016, 04:39 PM
After searching another EGR hysteresis maps like 1C450A 18x1
1C4570 18x1 no success
waldi1979
20th August, 2016, 05:37 PM
Try this file.
Egr is OK?
Dimpo
20th August, 2016, 05:59 PM
Try this file.
Egr is OK?
Hi M8, EGR is plugged. i will try now and reply!:)
Dimpo
20th August, 2016, 06:44 PM
Well. on ignition DTC is gone, but after car start it whows and limp mode.
Dimpo
20th August, 2016, 09:14 PM
Nobody?:apologetic:
Dimpo
22nd August, 2016, 06:23 AM
Hi all, Ecu sucessfully done. http://www.ecuconnections.com/forum/images/smilies/icon_e_smile.gif Has made EGR OFF with disconnected plug. No Limp mode, or other discomfort. Yesterday i've done 400km road test, all ok. PS no 25x1 or 18x1 maps were touched.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.