PDA

View Full Version : M3.8.3 Problem flashing with MPPS.



JimCoupeTQ
21st August, 2016, 02:25 PM
Hi, I bought a 06A 906 018CJ ECU wich is supposed to be M3.8.3 wich should be flashable. The Flash chip is 29F200AB But with MPPS i cant write to it. Im just getting MPPS error.. My tool works for other ECU like Me7.x.x and so on.. I know it works in those cases.

Could this 29F200AB chip be a non flashable chip?...

blade66
21st August, 2016, 02:38 PM
try this way and have fun

JimCoupeTQ
21st August, 2016, 02:58 PM
try this way and have fun


Thanks i have connected as described in "Bench Flash".. I can Get ID from ECU but not flash. Maybe i have to do an Immo OFF before?

I get ERROR message. ECU programming Voltage Missing.. But hmm..

jolidj
21st August, 2016, 04:58 PM
dissolder flash and do it on banc with other programator. some of this ecu cant read ore write.

gad3n
21st August, 2016, 05:40 PM
you are missing +12v on pin 43 on the ecu

JimCoupeTQ
21st August, 2016, 06:18 PM
you are missing +12v on pin 43 on the ecu

I have the Famous pin43 connected to +12V an i have double checked all connectors with multimeter. I have 12.5V from a bench battery connected to a stabilized source.

Im starting to think that it might be the immo? Security Access?

@jolidj This is not the PLCC44 chip its the 29F200AB chip.. Ive read tons of threads where ppl make this work? OR have i been disinformed,, hmm..

Apsik
21st August, 2016, 08:30 PM
I flashed exactly this ECU - 06A 906 018CJ on friday. Immo is not the issue.

JimCoupeTQ
21st August, 2016, 08:33 PM
Thanks.. Saved me some headace.. :) ECU Programming Voltage Missing is still my problem.. :( any suggestions?

gad3n
21st August, 2016, 09:04 PM
i flashed many of these ecu's .. programming voltage missing is always pin 43 :) never had problems with immo

JimCoupeTQ
21st August, 2016, 09:15 PM
OMGFG... I installed MPPS 13.02 on my Win7 Machine instead.. and you know what!!! I WORKS !!!!!!!!!! Thanks anyway guy.. im impressed of quick answers and good response.. i gotta hang around in this forum more..