Volvo S60 -13 P31334279 Read - Please help

[Plunnder]

Hi everybody!
Im looking for a bit of urgent help, does anybody know how to read Volvo S60 2013 Airbag module (95128) with UPA-USB(UUSP-S)?
Im looking for wiring diagram to connect to the eeprom. Here is a picture:

http://i64.tinypic.com/6ydzx4.jpg

Thank you so much guys, all help is appreciated! :)

[repairmymodule]

You should get one of these. http://media.digikey.com/Photos/Pomona%20Photos/5250.JPG

[Plunnder]

You should get one of these. http://media.digikey.com/Photos/Pomona%20Photos/5250.JPG
Thanks but do you happen to know how i connect it to my UPA? What wires to what? :)

[repairmymodule]

I do not use upa but pin one on the chip is the lower left. Pin 5 is the upper right. So it goes something like this:

8-7-6-5
1-2-3-4

So look at you upa manual and find out the pin numbers and connect wires accordingly from the Pomona test clip to your UPA

[Plunnder]

Which one is ground and power?

[repairmymodule]

Ground is pin 4, power is pin 8

[Plunnder]

Ground is pin 4, power is pin 8
Do you know if i could just desolder chip and solder wires to it? Do you know the 6 rest pins? What they are? :)
Thank you so so much for trying to help me! :)

[lwood]

Thanks but do you happen to know how i connect it to my UPA? What wires to what? :)

in the UPA's software top right corner, click Help- Contents,, everything that you need is in that PDF ..

[Plunnder]

in the UPA's software top right corner, click Help- Contents,, everything that you need is in that PDF ..
I can't find 95128 in UPA Software Help- Contents.. :/
Dont want to wire it wrong and brake the module, please help!

[repairmymodule]

95128 is same pinout as all 95xxx chips