View Full Version : Mercedez W204 CGW Location
n599fbm
22nd August, 2016, 09:09 AM
Hi Guys , I have a Mercedez W204 2010 model, I need to proram the CGW Gateway Unit,
Where is location the CGW Unit ???
Many Thks 11
Rgds,
C.
lupu_sandu
22nd August, 2016, 09:09 AM
In front SAM.
n599fbm
22nd August, 2016, 09:14 AM
I dont understan !! the SAM is in the trunk, and the CGW ??
lupu_sandu
22nd August, 2016, 09:16 AM
Front SAM mate.
CGW is in the same board as SAM. Front SAM have 2 processors. One for SAM one for CGW.
n599fbm
22nd August, 2016, 09:19 AM
ok Friend !!! Many thks for your quick answer !!!
Rgds,
C.
n599fbm
22nd August, 2016, 09:37 AM
Is this ???
Speedosoft
22nd August, 2016, 10:05 AM
Yes that's it.
Sent from my iPhone using Tapatalk
volismb
22nd August, 2016, 10:31 AM
Is this ???
Yes, this is the one. Here you have 2 units: CGW and FRONT SAM
lupu_sandu
22nd August, 2016, 10:43 AM
Here is explanation:
n599fbm
22nd August, 2016, 12:39 PM
MANY THKS FRIENS !!!!
I will try read the MCU,
Rgds,
C.
hass42
22nd August, 2016, 01:14 PM
MANY THKS FRIENS !!!!
I will try read the MCU,
Rgds,
C.
Will you be removing chip off board to read?
Hass42
n599fbm
22nd August, 2016, 04:03 PM
Many thks all you Friends !!!!
diagtech
23rd August, 2016, 09:32 PM
Has anyone got wire up to read this thanks
lupu_sandu
23rd August, 2016, 10:14 PM
RST must be lifted:
diagtech
23rd August, 2016, 10:21 PM
Thanks for that
Frankcar
24th August, 2016, 08:19 AM
All CGW w204 w212 only have mcu with two mask ? 1L15Y (old model) and 3M25J (new model) ?
This correct ?
alclot
25th April, 2017, 10:10 AM
Hi everybody! I havce similar SAM for W204 mercedes year 2009. Does anybody know pinout to check by obd in bench?
Thanks in advance ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.