PDA

View Full Version : opel vectra 1.9cdti need original flash



tiugrikas
25th August, 2016, 10:41 PM
hi mates need ori flash opel Vectra 1.9 cdti 2005y bosch software 1037370821
hardware 0281011449
opel software 55189630
thanks in advance

Bllinda
25th August, 2016, 10:47 PM
is here ... (http://www.digital-kaos.co.uk/forums/search.php?searchid=8718501). ....

Raider20
25th August, 2016, 11:22 PM
http://www.digital-kaos.co.uk/forums/showthread.php/387016-Need-full-bdm-dump-for-Opel-1-9-CDTI-hw-0281-011-449-sw-1037370821

tiugrikas
26th August, 2016, 10:16 AM
I already tried this one few days ago and doesn't start at all . Problem is that car cuts off and doesn't start few minutes and after scan there is no any fault code found also if I disconnect any plug there is no fault also . so flash I think was very mod somewhere . because dpf plug also I found disconnected. here is file from car I have. maybe someone could check it for me ? o have original flash file of this one ?

stanislav georgiev
26th August, 2016, 10:34 AM
see this :)

tiugrikas
26th August, 2016, 04:34 PM
same not working :(

carbon7319
26th August, 2016, 08:52 PM
In your case we must going step by step.
I will post your file with restored DTC , so you must flash my file , then you scan for errors , make print screen of errors , delete errors , start car drive little and scan again and print screen.
After that post your print screen to delete just errors what need to be deleted.
Your file >
394568

tiugrikas
28th August, 2016, 06:55 PM
I tried today and car didn't start with this flash . I tried about 5 different flashs and same . only starts with flash which I posted here . I am confused now .

carbon7319
29th August, 2016, 04:50 PM
What tool you use for read/write ?

tiugrikas
29th August, 2016, 10:42 PM
I use mpps and kess also I have galetto 54 and ktag for scan I use op com .

tiugrikas
29th August, 2016, 10:50 PM
yes I thought maybe some of my tool do not write correctly but for opel I use mpps about 3 years and never had problem with it . I tried kess but same result . one thing is strange that ecu is already was opened is it possible that somehow it was changed from other car and somehow mpps do not recognize correct flash inside ecu . i want to say that tflash number is stored in mpc but actual flash is different inside ecu . because i don't what else to think . first something very strange in my practice that i cant finger out .

carbon7319
29th August, 2016, 11:38 PM
Oh Ok.Write back your file and try to start your car. If car start read ECU with BDM and post file.

tiugrikas
30th August, 2016, 10:05 AM
this is full bdm my friend

carbon7319
30th August, 2016, 12:39 PM
Did you try write my file with bdm ?

Napi
30th August, 2016, 12:52 PM
here you go mate, 2 other files ori

395118
395120

tiugrikas
30th August, 2016, 03:34 PM
no I didn't try write your file with bdm carbon 7319

Yura123
30th August, 2016, 03:45 PM
You can find full BDM file (MPC, Flash, EEPROM) from other car, and through login bind to the car. Login is in eeprom.

carbon7319
30th August, 2016, 06:13 PM
no I didn't try write your file with bdm carbon 7319

Write and you will see result.