TOYOTA G KEY

[teeone]

HIE DK HAVE TOYOTA HILUX WITH G KEY. IMMO BOX GOT DAMAGED BY WATER . I REPLACE WITH USED ONE AND SWAP EEPROM. BRIDGED PIN 4ND 12 FO 45MINS CAR RUNS FOR 5 SECONDS AND DIES STILL GIVING CODE FOR IMMOBILISER. I DONT KNOW IF ITS AN ECU SYNCH PROBLEM OR I NEED TO RESRET THE IMMO BOX DUMP
i will be happy if someone can explain to me which situation requires resetting immo dump

[TM100]

posted VIN

[rob h]

BRIDGED PIN 4ND 12. You need to bridge 4 and 13!

[teeone]

sorry i bridged 4nd 13 but i still need info on why nd when dump should be reset

[TM100]

posted the number on the ImmoBox I'll give you more info

[ray-ray]

Did you check Ariel around the ignition?

[teeone]

Did you check Ariel around the ignition?

AERIAL IS FINE\. IF I DISCONNECT AERIAL CAR DOES NOT START AT ALL.BUT IF CONNECT AERIAL CAR START AND IDLE FOR ABOUT 7 SECONDS. BEFORE BRIDGING PINS CAR RUN 1 SECOND

[Tedum]

AERIAL IS FINE\. IF I DISCONNECT AERIAL CAR DOES NOT START AT ALL.BUT IF CONNECT AERIAL CAR START AND IDLE FOR ABOUT 7 SECONDS. BEFORE BRIDGING PINS CAR RUN 1 SECOND

Am thinking eeprom is not good so return the new eeprom and write back the data from the old eeprom also check the direction of the eeprom that also cause the problem

[teeone]

hie can someone synch immi box and ecu dumps

[bram380]

DK member will help you, if they can see the dumps and part no.

Sent from my HM 1S using Tapatalk

[teeone]

DK member will help you, if they can see the dumps and part no.

Sent from my HM 1S using Tapatalk
BRAM thnks for your response will surely upload the dumps

[bearheroes]

post also error code...very important for solution... :)

[teeone]

i am getting flash code 99

[teeone]

PROBLEM SOLVED CAR STARTING THANK YOU ALL FOR ASSISTANCE. I HAD TO SPEND 10 HOURS OF HARD THIONKING AND
RESEARCH. G KEY/////////////////////////////HA HA HA HA

[siyadk]

can you enlighten us ...I could get the same issue in future. so need to be prepared from your experience

[teeone]

GUYS I AM VERY PLEASED TO SHARE THIS INFO WITH YOU PLIZ DONT FORGET TO PRESS THANX BUTTON
1.I descovered that g key and ordinary 4d key use same ecu nd sam,e software in processor in ecu
2.now when g key stArts to trouble you simply remove the g key immo box and put 4d immo box and add 1d67 transponder with page 1 52 or 32
if u do this correctly security light will go off because wiring and CAN is the same
3.BELIEVE IT OR NOT YOU DO NOT NEED TO SYNCH CAR WILL STAT AND RUN 100% ITS LIKE MAJIC THE 4D IMMO DUMP AUTOMATICALLY SYNCHS WITH G KEY ECU DUMP


CHEEEEERRRRRS

[rob h]

Hello Teeone, (Your inbox is full)

I wonder if a H could work with a G immobox.
Or even with a 4d,

I know that the pin out from the boxes are different.

Does H use something other than k-line, like canbus?

Thanks for the sharing of your G immo discovery!

Greeting Robbert

[teeone]

Hello Teeone, (Your inbox is full)

I wonder if a H could work with a G immobox.
Or even with a 4d,

I know that the pin out from the boxes are different.

Does H use something other than k-line, like canbus?

Thanks for the sharing of your G immo discovery!

Greeting Robbert

HIE ROB AM STILL DIGGING IFO BUT I WISH SOMEONE CAN UPLOAD ME SOME H KEY DUMPS I DONT HAVE ANY PREFERABLY A PAIRED SET

[PremierD]

Good work mate .... but please remove the CAPS lock ... no need to shout :)

[rob h]

H Keys do not have a eeprom like g immoboxes do!
Maybe in the ecu's

[teeone]

Good work mate .... but please remove the CAPS lock ... no need to shout :)

will do so and thanks for the complement

[khaled75957]

Make the same procedure with the new ebrom may be the old one is corrupted .

أرسلت من SM-N9005 بإستخدام تاباتلك

[siyadk]

if this works... i say this is what exactly called "thinking out of the box"

good thinking:congrats:

[teeone]

if this works... i say this is what exactly called "thinking out of the box"

good thinking:congrats:

have done it three times now really works