View Full Version : Audi A4 140cv breaking turbine 2 times in succession why?
lucioantonio
26th August, 2016, 08:47 PM
after a remap first turbine was immediately broken white smoke.
after review turbine 10 minutes were enough to break the turbine
where he went wrong the preparer?
mateusz1611
26th August, 2016, 10:37 PM
file is terrible but shouldn't kill the turbo
smirnoff_rules
26th August, 2016, 10:58 PM
did u fit new or used turbo , cant see a file doing it tho
did u check oil feed and return pipes
jolidj
27th August, 2016, 10:26 AM
problem is your turbo.not pressure oil inside. if turbo is ok you can joke from maps whith hight pressure.
lucioantonio
29th August, 2016, 08:01 PM
turbina after 10 minute
gitko
29th August, 2016, 08:41 PM
turbina after 10 minute
This turbo look like a new:chuncky:
gitko
29th August, 2016, 08:45 PM
your file is not very well but shouldn't kill a turbo
Andrei2015
30th August, 2016, 10:02 AM
Have you tested oil pressure? Maybe you got oil from old turbo, into intercooler, pipes, intake and this can ruin second turbo if you didn't clean all this
18mep
30th August, 2016, 10:13 AM
common problem with these cars, check oil pomp and piping.
jolidj
30th August, 2016, 12:44 PM
you have low pressur inside maps. your problem is on car.
sida
30th August, 2016, 09:08 PM
your better check shaft on oil pump, it is probably looks more like round then hexagon
teerak2uk
30th August, 2016, 09:11 PM
your better check shaft on oil pump, it is probably looks more like round then hexagon
I agree oil pumps are common failure on these also check feed pipes of debris from old blown turbo's
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.