PDA

View Full Version : VW Passat 2,0tdi 125KW BMR need some DTC-OFF



felix_fetche
27th August, 2016, 11:00 AM
Hi,
DPF is drilled, measured diferential pressure, and exhaust pressure are implisible.

here are DTC and ori file,
please off this functions, and also make post injection off.
THANKS!!!



Address 01: Engine Labels: 03G-906-018-BMN.clb
Control Module Part Number: 03G 906 018 EM HW: 03G 906 018 EM
Component and/or Version: R4 2.0l

3 Faults Found

001137 - Exhaust Pressure Sensor 1 (G450)
P0471 - 006 - Implausible Signal - MIL ON
Freeze Frame
Fault Status: 11100001
Fault Priority: 1
Fault Frequency: 254
Reset counter: 40
Mileage: 164380 km
Time Indication: 0
Date: 2016.07.21
Time: 13:57:28

Freeze Frame
RPM: 0 /min
Torque: 136.0 Nm
Speed: 0.0 km/h
Pressure: 0.0 mbar
Text: 148 C
Text: 42 mbar
Temperature: 22.5?C

001137 - Exhaust Pressure Sensor 1 (G450)
P0471 - 006 - Implausible Signal - Intermittent - MIL ON
Freeze Frame
Fault Status: 10100001
Fault Priority: 1
Fault Frequency: 106
Reset counter: 40
Mileage: 164380 km
Time Indication: 0
Date: 2016.07.21
Time: 13:57:30

Freeze Frame
RPM: 0 /min
Torque: 136.0 Nm
Speed: 0.0 km/h
Pressure: 0.0 mbar
Text: 42 mbar
Text: 196 C
Temperature: 24.0?C

008194 - Particulate Trap Bank 1
P2002 - 006 - Efficiency Below Threshold - Intermittent
Freeze Frame
Fault Status: 00100001
Fault Priority: 1
Fault Frequency: 19
Reset counter: 17
Mileage: 164393 km
Time Indication: 0
Date: 2016.07.21
Time: 14:13:11

Freeze Frame
RPM: 2304 /min
Torque: 120.0 Nm
Speed: 72.0 km/h
Pressure: 0.0 mbar
Text: 42 mbar
Text: 352 C
Temperature: 24.0?C


Readiness: N/A