View Full Version : Sid206 cloning
teerak2uk
27th August, 2016, 01:29 PM
What's the procedure I have tried to backup seperately and you get
http://uploads.tapatalk-cdn.com/20160827/338ae4178255e8ee3a1ca6c27b70a6b7.jpg
If I just do backup I get an option to save seperately
http://uploads.tapatalk-cdn.com/20160827/a510782203e17659a9ecdaaf03185f17.jpg
So on restore do seperately or does 1 file pull others in
All read/write via ktag
http://uploads.tapatalk-cdn.com/20160827/877ff4542c35b56f85db21dd9eb52328.jpg
Regards
javyb
27th August, 2016, 01:33 PM
Transfer the .epr file it should transfer immo data
Sent from my SM-G935F using Tapatalk
teerak2uk
27th August, 2016, 01:36 PM
Yes but other data will be needed from other areas as the sid206 is fitted in numerous vehicles
carmageddon
27th August, 2016, 02:34 PM
to clone one ecu you need : flash-mpc-e2p
sid 206/803 (with 2mb flash) is not clonable
teerak2uk
27th August, 2016, 02:45 PM
to clone one ecu you need : flash-mpc-e2p
sid 206/803 (with 2mb flash) is not clonable
But when you do backup there are 3 files
2048kb map area
675kb some other area
4kb Eeprom area
carmageddon
27th August, 2016, 03:13 PM
675kb some other area
this is encrypted backup of flash and e2p
mpc is not readable on this ecu
ps : if you make backup on sid 803 (1 mb flash) you have 4 files : flash, mpc, e2p and encrypted backup
teerak2uk
27th August, 2016, 03:16 PM
this is encrypted backup of flash and e2p
mpc is not readable on this ecu
ps : if you make backup on sid 803 (1 mb flash) you have 4 files : flash, mpc, e2p and encrypted backup
What options are there original ecu damaged from accident so customer came to me with original and replacement which has matching h/w & s/w numbers
carmageddon
27th August, 2016, 04:41 PM
read on label all numbers and find one used ecu with the same numbers
make backup for compare flash
write flash and e2p on used ecu
connect to car
start
teerak2uk
27th August, 2016, 04:45 PM
read on label all numbers and find one used ecu with the same numbers
make backup for compare flash
write flash and e2p on used ecu
connect to car
start
This is what I've done was just unsure what the other file was that's all maybe it's just a compressed fash & eeprom file
carmageddon
27th August, 2016, 07:51 PM
if you dont have the same ecu number you can not write e2p and flash because the car dont start
teerak2uk
27th August, 2016, 08:16 PM
Both are same
HW: CAFRB650FRB6500
SW: 10107066AA
SW UPG: 6G91-12A650-EM
VIN NR:
SPARE:
INSTALLATION:
ENGINE:
carmageddon
27th August, 2016, 09:16 PM
i wrote : you need to have same numbers on the label on ecu...if this is the same you have same MPC, then you can write flash and e2p....if not your car will not start
teerak2uk
27th August, 2016, 09:44 PM
Yes label on casing is same too
carmageddon
28th August, 2016, 07:05 AM
ok, i make 3 time this operation and work
remolyy
25th October, 2019, 10:22 AM
How about eeprom writing protection. I read sid206 flash and eeprom. Then write flash back. But on the eeprom writing geting error Write protection enabled.
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.