PDA

View Full Version : VW Jetta 2.0TDI EGR OFF NEEDED



twchnodictator
28th August, 2016, 03:09 PM
Hello mates,

Have a problem with Jetta 2010-11 year, EGR valve in the car not functioning normally.
Car is USA edition and I can not make it off by any software I have.
Can anyone help me with that stuff?
Adding you full flash of ECU (BOSCH EDC17CP14).

File here - 394778


Thanks for your time and help. :)
Reputation and THANKS guarantee.

kinketotua
28th August, 2016, 03:25 PM
here
--> 394783

twchnodictator
29th August, 2016, 11:17 AM
here
--> 394783
Thanks for the file, but I can not write it (if it's INTERNAL FLASH)
It gives me message (picture added).
394865
I can click on OK or Cancel or Close, but nothing happens.
If I try to to write EXTERNAL FLASH everything is ok and works.
Somebody knows where is the problem? (ECU is EDC17CP14)

twchnodictator
29th August, 2016, 01:53 PM
Mates, I found such info that I have to write ALL files in one time. Not separately 2mb of internal flash and 2 of external, but I need 4mb of full flash in 1 file and it must be checksummed already.
Can someone help me with that?
File added 394910

kinketotua
29th August, 2016, 03:33 PM
Galleto not ori? Sorry I send you with checksum calculated

twchnodictator
29th August, 2016, 03:52 PM
Galleto not ori? Sorry I send you with checksum calculated

Not ori. I see mate that you sent me with checksum, thank you vey much for your help, but you sent me internal flash only, and my tool does not want to make a thing.
It can write ALL, write EXTERNAL, but no INTERNAL flash. That's why I'm asking to make ALL files in one.

twchnodictator
30th August, 2016, 06:37 AM
As I see it's impossible to solve this situation:apologetic:

kinketotua
30th August, 2016, 08:32 AM
Sorry Ibdont know how to solve

dominik.m
31st August, 2016, 01:11 AM
I had similar problem with version from USA. If You have only FGTech , it then was one should so:
-read all
-change what You need
-calculate cks (all)
-write
-ready

boomeer
31st August, 2016, 05:54 AM
As I see it's impossible to solve this situation:apologetic:

Sometime winols do wrong calculation CS and after you try write mod file fgtech give that error.
Solution is when do mod try not accept CS correction by winols and write again!

luca22
31st August, 2016, 04:01 PM
Sometime winols do wrong calculation CS and after you try write mod file fgtech give that error.
Solution is when do mod try not accept CS correction by winols and write again!

100% right

I had this problem twice, simply uncheck the counting checksums by the program when you are modificated and the problem is solved

Regards
Luca :)

twchnodictator
31st August, 2016, 06:29 PM
So guys, problem solved.
I made some changes in flash_all 4.12mb, like kinketotua mae in INTERNAL_FLASH file with the help of HEX-EDITOR and made WRITE_ALL.
Car goes, egr is off...everything is good!

Special thanks to kinketotua! (http://www.digital-kaos.co.uk/forums/member.php/468697-kinketotua)

twchnodictator
31st August, 2016, 06:30 PM
I had similar problem with version from USA. If You have only FGTech , it then was one should so:
-read all
-change what You need
-calculate cks (all)
-write
-ready

That's exactly what I made yesterday!

kinketotua
1st September, 2016, 07:01 AM
Perfect friend!!! allways learning