PDA

View Full Version : Volvo S60 2.4 Turbo tuning



Fec001
31st August, 2016, 11:40 AM
Anyone here experienced with these volvo engines?
Car is S60 2.4T 200HP MY2001. Engine code: B5244T3
We put turbo and injectors from Engine 2.3 turbo B5234T3 250HP.
Can Someone help me with a good tuning file for the new parts?
Car was on dyno and measured 217HP

konopel
31st August, 2016, 08:19 PM
Upload stock file.
Have you tried to run the car after it?
If you want I can send you a stock file for 2.3T 250HP and make tuning file for the car.
Is the car manual or AT?

Fec001
1st September, 2016, 07:59 AM
Car is manual. We tried car after put new parts on the engine, works ok and measured 217HP on dyno. Here I upload stock 2.3T file and the car's stock file.
I think it's enough to copy injection and boost maps from 2.3T to 2.4T file and "riase" some values.

konopel
1st September, 2016, 08:50 AM
One more question. Have you tried to run the car using software from 2.3T stock?
I have changed some maps. Try it.
But I think you should test stock 2.3T file at first.

Fec001
1st September, 2016, 10:38 AM
Don't try 2.3T stock flash because I think it will not start the car because of immo. But I will try then...

konopel
1st September, 2016, 12:06 PM
IMMO is in EEPROM

jahko
16th February, 2017, 05:09 PM
I've got one of these, did you manage to tune it?

voltechcar
16th February, 2017, 10:18 PM
immo in eeprom but when you write other maps to flash cars maybe not start, tested to many cars

jahko
20th February, 2017, 01:46 PM
immo in eeprom but when you write other maps to flash cars maybe not start, tested to many cars
what did you use to read immo?