View Full Version : Kenwood DNX 5210BT code needed
Dragan78
4th September, 2016, 09:52 PM
I have DVD Kenwood DNX 5210BT but I do not have the code. Here reeded 24c08 from pcb.
Code please!
shooting
4th September, 2016, 11:43 PM
I have DVD Kenwood DNX 5210BT but I do not have the code. Here reeded 24c08 from pcb.
Code please!
Dump bad or wrong eeprom...
wbr
Dragan78
5th September, 2016, 05:47 AM
I find on pcb`s only 24c08 marked with red square in picture.
Can you help me to point on pcb else eeprom?
396126396127396128
kappa1
5th September, 2016, 07:21 PM
Hi try code 1200
barbatecat
5th September, 2016, 08:38 PM
code may be need to look in flash memory ?
Dragan78
5th September, 2016, 11:33 PM
Code 1200 not good for me.
I found an spi eeprom in display pcb: winbond 25x10396364
sonices
6th September, 2016, 12:58 PM
In Martech for model DNX5220BT is 24c08. Where is your dump from other one eeprom on main board?
Dragan78
6th September, 2016, 11:35 PM
396571
Here it is dump from 25x10 winnond
barbatecat
7th September, 2016, 06:49 AM
TRY THIS .....
Dragan78
7th September, 2016, 02:14 PM
Found code 1977 by several tries
nikz
7th September, 2016, 02:49 PM
what eeprom code ?
Dragan78
7th September, 2016, 03:55 PM
After 4 hours manual tries
mihai cristian
20th January, 2019, 09:53 AM
the code is in 24c08 on the main board? or in the eeprom from display?
Raimax
20th January, 2019, 12:13 PM
.....................
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.