MPPS v18 GOOD OR NOT?

[gezame]

volvo is different story, only io terminal can read them via obd, if you dont have it - only bdm
Hi
Sorry, but you dont rigth.
Fgtech original, read-write flash & eeprom without problem in obd.
Br.

[OVERSPEED]

there is really no way to make it work on XP ?

[pulsar2000]

Mazda 3 1,6 TD
2009 car, edc16c34 - LIKE focus

Read . write OBD fine,
reads 3 times or 3 areas so bar goes 100% then start again weird, never before seen like this, same on write 2 times i think bar goes accross,
then 99% wait 4 mins or so, was begining to think BAD NEWs, then all ok,
car perfect file on ecu,

[cristim]

Mazda 3 1,6 TD
2009 car, edc16c34 - LIKE focus

Read . write OBD fine,
reads 3 times or 3 areas so bar goes 100% then start again weird, never before seen like this, same on write 2 times i think bar goes accross,
then 99% wait 4 mins or so, was begining to think BAD NEWs, then all ok,
car perfect file on ecu,

same thing into focus, read 3 sectors about 10 min and write 4,20 min than wait 3 min.
after that 3 min i wait another 2 min, like software says.

[smirnoff_rules]

its looking like this clone is worth its weight in gold ,, wouldnt be happy if l had a box full of eu clones for sale if these do the same job

[pulsar2000]

same thing into focus, read 3 sectors about 10 min and write 4,20 min than wait 3 min.
after that 3 min i wait another 2 min, like software says.

"like software says" where you see that ?
never seen any info on read times ,,, then my eyes are not the best, saw all the usual blurb, but dont think saw any info on read write times,

[cristim]

look
415531

[mircea13]

working on xp.....i don't think so

[pulsar2000]

Nice 1 missed that, time for eye test i think,

As for XP, works Perfect win 7 etc, just buy a cheap win 7. or 8 notebook "overspeed" , not worth it, say you did find a way on xp, is it worth risk writing ecu, risk enough we guinea pig clones as it is, lets just not reinvent the wheel, if its meant for win 7, etc, im happy to comply. have to admit quite like XP so had to invest in a cheap laptop for this mpps 18 testing,

[gazvts]

its looking like this clone is worth its weight in gold ,, wouldnt be happy if l had a box full of eu clones for sale if these do the same job
These cheapies are getting more feedback than eu tool is\was lol

[blajetoo]

I have EU CLONE V18 and try it on Audi Q7 3.0tdi 232hp and VW TOUAREG 2.5tdi 150hp and havent any problems.But cant read it MB E220CDI W211 150HP just this car mine cant read.

[2200]

I have EU CLONE V18 and try it on Audi Q7 3.0tdi 232hp and VW TOUAREG 2.5tdi 150hp and havent any problems.But cant read it MB E220CDI W211 150HP just this car mine cant read.

You should write here which ecu it was...

[blajetoo]

Ecu was BOSCH EDC16 !!!

[filutek]

Mazda 6 2.0 MZR-CD 110hp Denso RF8G- OBD R/W - OK
Hardware: RF8G-188K2-K
Software: RF8G-18881-K

[kukukatsu]

hi try to open software and i recive:

there has been vs application exception error

tried on 2 computers win 7 32 and 64 bit


any ideas?

[gazvts]

Go to mpps folder set the applications to run as admin

[kukukatsu]

already tried and not working

[pulsar2000]

already tried and not working

surely hardware error it has to be. China or E.U clone, where u buy unit, maybe seller resolve, im sure if genuine fault seller Replace,,,

[gezame]

Hi
Opel vectra C, PSG16 can, direct conexi?n to pump,read-write-cks, all Ok.
Simos Pcr2.1, obd read-write-cks ok.

[kukukatsu]

china clone, tried to contact with seller i hope he will help....

[gezame]

Hi
In widows 7 Ultimate 64bits, work ok.

[gazvts]

china clone, tried to contact with seller i hope he will help....try re installing/ repair all net frameworks inc 4- ?

[kukukatsu]

try re installing/ repair all net frameworks inc 4- ?

I will, thanx

[rojhat]

hi all members
mazda cx7 2.2 170 ecu denso dont ok read 4% after error

Envoy? de mon SM-A510F en utilisant Tapatalk

[smirnoff_rules]

hi all members
mazda cx7 2.2 170 ecu denso dont ok read 4% after error

Envoy? de mon SM-A510F en utilisant Tapatalk

wot voltage did u try

[rojhat]

hi tryed on obd with 12.5v no charger or booster

Envoy? de mon SM-A510F en utilisant Tapatalk

[filutek]

Lacetti (2008y) 2.0 CDRi EDC16C39 R/W CAN (only map 2Mb) as Captiva = OK

[michalkow]

BMW e91 330xd edc16c35 R-W OK China clone

[gazvts]

Astra vxr me7.6.2 R/W OK ( do that ecu own risk ! )

[cawadany]

So, are there substantial differences between eu and china tool?

[VRPerformance]

PSG16 work ok? read write via OBD???

[filutek]

Yes PSG16 ok can obd, if k-line obd only pump pin can R/W.

[maybach_]

Hi boys
someone known whare to find the boot connection diagrams for MPPS?
Thanks in advance

[smirnoff_rules]

all the same as fgtech m8

[bitmaster123]

Can anyboydy tell me please if is true that this V18 Eu MPPS can make VAG PCR2.1 fully on OBD (without unlock on table) ?

[smirnoff_rules]

Can anyboydy tell me please if is true that this V18 Eu MPPS can make VAG PCR2.1 fully on OBD (without unlock on table) ?

not true .....................

[CustomCars]

not true .....................
But maybe soon at version V21.2.6.1 hehe

[gezame]

Yes PSG16 ok can obd, if k-line obd only pump pin can R/W.
Hi
You are sure, i think for read, only in table, not in obd.
For write, yes, obd or table.

[gezame]

not true .....................

Hi
Latest X17 update, yes write obd without unlock.
But i dont test now.
Br.

[LaraVAG]

X17 works perfect without open ECU.
If you have clon Kess you can do it to:
1. read oryginal file by OBD2
2. do your modification
3. correct CRC by genuine WINOLS
4. use ODIS, VAS, VCP
5. search FRF to this ECU
6. write FRF ( update software like in service )
7. when you have about 80% write software, disconet tool.
8. Now use Kess V2 recorvery and use before your file with CRC ok.

Now you know how to no open PCR2.1 :D

[morfej]

Person with clone Kess would not own geniue winols I would say :)

So non genius winols would not fix checksum or ?

[cristim]

Fiat Doblo 1.3 mjet mjd6f3 obd - r/w ok
Range Rover edc17cp11 boot - r/w ok
this tool looks great

[LaraVAG]

Person with clone Kess would not own geniue winols I would say :)

So non genius winols would not fix checksum or ?


Kess in recorvery mode dont calculate CRC.

[cristim]

X17 works perfect without open ECU.
If you have clon Kess you can do it to:
1. read oryginal file by OBD2
2. do your modification
3. correct CRC by genuine WINOLS
4. use ODIS, VAS, VCP
5. search FRF to this ECU
6. write FRF ( update software like in service )
7. when you have about 80% write software, disconet tool.
8. Now use Kess V2 recorvery and use before your file with CRC ok.

Now you know how to no open PCR2.1 :D

many users from here use 2.24 winols
it is a must to use genuine winols?!!!
what can i do if i use cracked ols and crc is not good, can i still make update with vas?!!!

[LaraVAG]

Yes VAS, ODIS, VCP, VVDI, ABTRIUS can recorevery this ECU by FRF file.

[smirnoff_rules]

anyone know where to get some older frf files for odis

[cristim]

off topic again, i have installed odis-e 5.0.14
tomorow i'll have to do skoda pcr2.1 but it has in 2015 last update.
can be done by obd?

[smirnoff_rules]

off topic again, i have installed odis-e 5.0.14
tomorow i'll have to do skoda pcr2.1 but it has in 2015 last update.
can be done by obd?

l would of thought it would still let you write last ftf again, but please take some photos while you do this , would be a great help to others

[cristim]

i'll try to do photos
it will work only with frf file?!!! no sgo\sgx?
but first, need to find frf file for that ecu, it has 3 updates untill now, injectors problems.

[Artilect]

With ODIS Engineering you can write any file you want. I have downgrade EDC17C46 also without any problem.

BR
S

[smirnoff_rules]

With ODIS Engineering you can write any file you want. I have downgrade EDC17C46 also without any problem.

BR
S

you ever tried odis on bench ? l can see chassis number but cant get to flash , wonder if it need to see more control modules ?

[H.Wessel]

you ever tried odis on bench ? l can see chassis number but cant get to flash , wonder if it need to see more control modules ?
Immo problem, you can not flash with immo on

[cristim]

hi guys,
bad news...
my client decided to buy a brand new egr for his octavia 1.6 tdi
so, no pcr2.1 flashing over obd port.

[2200]

i'll try to do photos
it will work only with frf file?!!! no sgo\sgx?
but first, need to find frf file for that ecu, it has 3 updates untill now, injectors problems.

give me full ecu numbers I will look if I can get file for you.

if you want you can connect ecu with vcds and post picture here.

regards

[pulsar2000]

hi guys,
bad news...
my client decided to buy a brand new egr for his octavia 1.6 tdi
so, no pcr2.1 flashing over obd port.
wow so he would sooner pay the 5 Hour Mechanic Labour fee, and new Valve, ?
not cheap job,,

[smirnoff_rules]

he will be back in 6 months , make sure its from the agent they have updated this a few times

[pulsar2000]

he will be back in 6 months , make sure its from the agent they have updated this a few times

Or pays your money and take a chance, heard OEM only type to Buy, Now with the Garage Labour and OEM part , very very Expensive, LOL
all untill sooner rather than later again :apologetic:

[smirnoff_rules]

Or pays your money and take a chance, heard OEM only type to Buy, Now with the Garage Labour and OEM part , very very Expensive, LOL
all untill sooner rather than later again :apologetic:
they made them to large , lots of space for carbon to build up

[LaraVAG]

ODIS can't update any ECU without car, key, dashboard....
ODIS cant write the same update number, only high number of update.

file to download sgo, frf .... for all VAG
https://vag-flashinfo.kluthr.de/index.php

[cawadany]

ODIS can't update any ECU without car, key, dashboard....
ODIS cant write the same update number, only high number of update.

file to download sgo, frf .... for all VAG
https://vag-flashinfo.kluthr.de/index.php

From this site download of files is not possible.

[kitnoos2002]

ODIS can't update any ECU without car, key, dashboard....
ODIS cant write the same update number, only high number of update.


in odis-e ther some where is a tick box that u can tick or untick to not check the file version , so with odis u can go down and up in SW normaly odis say the file u want to write is older and do not want to write , but with thre tick box it posable i think under " admin . settings "
Who is right ?

[Artilect]

Who is right ?

I agree with jakesman. If you choose the right option you can write ABS flash to ECU :-)

[LaraVAG]

I agree with jakesman. If you choose the right option you can write ABS flash to ECU :-)

Good to know.
Last files in pack from ERWIN:

*Removed reference to similar forum....

[Artilect]

LaraVAG it's right about not be able to flash on bench with ODIS. It's possible if immo off or immo not active. Since you have ECU on bench immo is active (blocked) and ODIS will not let it Flash.

But you are not right about not be able to write same version or even older one. This I have done, and I'm 100% sure. But you have to uncheck option in:

Administrator\Functions configuration\Flashing (Engineering)\Activation version control

At least I was able to do it with my version. It's possible also that depend from version.

420466

[Artilect]

X17 works perfect without open ECU.
If you have clon Kess you can do it to:
1. read oryginal file by OBD2
2. do your modification
3. correct CRC by genuine WINOLS
4. use ODIS, VAS, VCP
5. search FRF to this ECU
6. write FRF ( update software like in service )
7. when you have about 80% write software, disconet tool.
8. Now use Kess V2 recorvery and use before your file with CRC ok.

Now you know how to no open PCR2.1 :D



If X17 it's working, then KESS V2 will have it in next update or very soon. I can't wait since I hate to open those ECU-s.

I have try to test your method on bench today. But since I was unable to Flash it with ODIS I will try some test to rewrite ori file with KESS V2 on bench and try to unplug at about 80%. And then I will try to recover with mod file.

Will see what happens.

BR

[LaraVAG]

First you need start update ECU by Service Tool (it will unblock Eprom to write any file) next use Kess V2. To update by service tool you need car.

[Johnner]

Guys....can we keep it on topic please....MPPS v18.....discussion

Thanks ;)

[nbtechnic]

Hello, I buy a mpps v18
I am waiting for delivery within 15 days and more
After the test I would tell you my experience with the mpps v18.

[filutek]

Corsa D 1.3 CDTI, EDC17C18, 70.0kw,2010, Z13DTE R/W bootmode TriCore™ = OK

[OVERSPEED]

After unlock Tprot10 in boot, can I use Kess to write by OBD or just MPPS can write it ?

[filutek]

GOLF V 1.6 FSI, MED9.5.10, OBD/CAN R/W ( 30 minutes) = OK

[kukukatsu]

Good tool

Wysłane z mojego LG-D855 przy użyciu Tapatalka

[twchnodictator]

Well mates, I started this topic and got the mpps so now I can share my results, finally.
Seems to be everything ok. Tried on edc15,16,17 and denso opel. Everything works very good and without any problems. Only once program said good bye and turned off during reading edc16 VW via obd, but I think it was WinXP problem. After installing win7 x32 everything works like a charm. Also according to your posts I think it's worth to buy it.

[vasco fernandes]

Well mates, I started this topic and got the mpps so now I can share my results, finally.
Seems to be everything ok. Tried on edc15,16,17 and denso opel. Everything works very good and without any problems. Only once program said good bye and turned off during reading edc16 VW via obd, but I think it was WinXP problem. After installing win7 x32 everything works like a charm. Also according to your posts I think it's worth to buy it.


china clone or eu ?

[tiito87]

Today I did Insignia 17cp19 TC1792 in boot mode.
Mpps processor recognized as the TC1766.
Read OK I compared with Galetto.
But when writing badly counted checksums. The car was in safe mode.
Record Galetto solved the problem.
He met with something like that ??? Mpps v18 EU

[gazvts]

TC1792 i do not see listed in manual processor selection

[tiito87]

So, everything is clear. Mpps does not support the TriCore ....

[pulsar2000]

So, everything is clear. Mpps does not support the TriCore ....

Yes it supports very well, why didnt you study the mpps v18 supported vehicles before attempting ?
Insignia not on list so pointless effort,

[smirnoff_rules]

Yea that could of ended badly aswell

[ecutuners]

I have done edc17c19 in mpps tricore bootmode several times. Doesn't show tc1792 but functions are exact to tc1796.
i would try using EU sw as checksum was done by tool on them all

[sonique]

Hello

any one fixed start mpps v18
but only this :
application exception error?

thanks

[Yura123]

Well mates, I started this topic and got the mpps so now I can share my results, finally.
Seems to be everything ok. Tried on edc15,16,17 and denso opel. Everything works very good and without any problems. Only once program said good bye and turned off during reading edc16 VW via obd, but I think it was WinXP problem. After installing win7 x32 everything works like a charm. Also according to your posts I think it's worth to buy it.

how you launched it in XP?
What driver for XP used?

[OVERSPEED]

MED17.4.2 DS3: had a CKS problem :
first made by OLS - didn?t start
second made by MPPS - not worked too, then import in OLS and correct again, check with MPPS and no errors... and this time it worked.

[OVERSPEED]

ME7.5 A3 180 With 29F400 not work... either auto, either selectin 29F400... but old MPPS V12/13 didn?t work either... just an old V3 I had worked

[Yura123]

Well mates, I started this topic and got the mpps so now I can share my results, finally.
Seems to be everything ok. Tried on edc15,16,17 and denso opel. Everything works very good and without any problems. Only once program said good bye and turned off during reading edc16 VW via obd, but I think it was WinXP problem. After installing win7 x32 everything works like a charm. Also according to your posts I think it's worth to buy it.


how you launched it in XP?
What driver for XP used?


When running on XP, appears a message

MPPS no longer supports Windows XP or lower

[filutek]

Kangoo EDC17C42 bootmode TriCore R/W = OK
MPPS not CRC bootmode TriCore.

[jameswalker]

Anyone tried an ST10 processor? ME7.1.1G?

[filutek]

MPPS boot ST10 tab generic it works.

[pulsar2000]

When running on XP, appears a message

MPPS no longer supports Windows XP or lower

Dont get that, win XP dont work full stop on mine . windows 7 minimum, how did you see message ? on xp ?

[jameswalker]

MPPS boot ST10 tab generic it works.

boot mode only?

and will it do both the flash plus processor internal memory?

thanks!

[nbtechnic]

Alfa Romeo EDC16C39-5.5 CAN, ok perfect
Reading in less than 2 minutes
My mpps is deliver and immediately test!
It will complete my Fgtech who did not read some car!

[gomarota]

anyone can tell me what the advantatges between mpps v18 and kess/ktag chinese? at the moment i only see the psg16, there is any other thing?

regards

[Faraday]

anyone can tell me what the advantatges between mpps v18 and kess/ktag chinese? at the moment i only see the psg16, there is any other thing?

regards
no token, some ecu EDC16 OPEL in example full write by obd

[spychu14]

Anyone tried to read SAAB PSG16 as opel ? There are no problems with checksum correction ?

[svnsv]

Eeprom R/W and Flash R/W on VW Golf EDC15P worked perfectly with 70€ V18 from eBay.
Looking forward to test some other ECUs in the next weeks.

[jameswalker]

Eeprom R/W and Flash R/W on VW Golf EDC15P worked perfectly with 70? V18 from eBay.
Looking forward to test some other ECUs in the next weeks.

Was this with the OBD connector or boot mode?

[svnsv]

Was this with the OBD connector or boot mode?

OBD while the ECU was installed in the car.

[Yura123]

Renault SID305 BOOT sak1766 read - write Ok. Checksum need winols.

[ionutdanica]

Hy guys this i'm me....
Wtf is copy my video with youtube....

[ionutdanica]

cheeky Chinese using this thread as reviews for there mpps lol

http://obd2all.blogbaker.com/category/car-ecu-programmer

I'm flash my car with mpps v16 only for test....

[roth18]

...anyone figured out how to read TCs with password in BMW DMEs ? Password known of course.

[Faraday]

VW PCR 2.1 doesn't work v18 clone

[filutek]

V18 EU
It works perfectly with PCR 2.1

[gazvts]

Smirnoffrules did pcr china clone ?

[smirnoff_rules]

VW PCR 2.1 doesn't work v18 clone

mine does no problem, first one l tested , also read and write on bench too

you see pictures of mine all over china selling sites lol

but its more work than you need ktag is so easy and alot faster . l dont use resistors

[smirnoff_rules]

pcr2.1 unlock with mpps china clone version 1

heres the pinout for this , i found how to do afew months back

standard wires
https://i.gyazo.com/2c60e5490f2898ccc3522981a04316bd.png
the second pin at the bottom left is kline green wire with mpps
now this is how you boot ecu without resistors.. but you might want to try resistors

https://i.gyazo.com/9b0fec0e9cefeebcbc8ae2cafd059187.jpg

https://i.gyazo.com/153cbc2fab889bf67c4af626b019f77f.png

unlocked here
writing eeprom here after unlock


https://i.gyazo.com/497d000d4dd914359bb97bec78fa979a.jpg

tested with kess too

https://i.gyazo.com/2c9f21c7a5879de1f9851f97cadfda86.png

[smirnoff_rules]

https://i.gyazo.com/6bb3c00a98973da6b590a74c60ee430d.png
https://i.gyazo.com/c8b5bc11b1c3f5fd329976c636e1fe28.png
https://i.gyazo.com/93ee6afa2ce6dde72eb90a57361dc659.jpg
worded better with 15v tho , but that might be the clone
https://i.gyazo.com/20d5167f353bd7aa2c563feb24738647.jpg


now turn off power leave pinouts on remove boot pins and read and write on bench on obd , its a fast way to do this ecu , just tested and unlocked and locked the same ecu 10+ times with no problems , think l will use this on the next one l get in

[extremebike]

I mpps v18 china.tried on MJD6 and really perfect

I mpps v18 china.tried on MJD6 and really perfect

[pulsar2000]

Anyone tried a Peugeot 407 2.0HDI Delphi DCM 3.4
had one in yesterday, list for mpps same car but DCM 3.5
Id ecu ok, but security access Fail on read,

i got the fgtech out, and all ok,

[extremebike]

second test of MJD6 via obd
READ: MPC e2p and Flash.
but lost injectors codes


question : having read the e2p , the injectors codes are visible in hex?

[smirnoff_rules]

second test of MJD6 via obd
READ: MPC e2p and Flash.
but lost injectors codes


question : having read the e2p , the injectors codes are visible in hex?

isnt there an injector listed in the menu , go there first to save codes and write back after flash ?
just checked there isnt for this ecu

[extremebike]

by e2p you can not read them?

curiosity :)

[smirnoff_rules]

ANYONE READ DENSO for this car with mpps ?
DENSO_SH7058_OPEL
cdti zafria B z17dtj 2010 kw 108-81

[twchnodictator]

ANYONE READ DENSO for this car with mpps ?
DENSO_SH7058_OPEL
cdti zafria B z17dtj 2010 kw 108-81

worked for me

[filutek]

Ford Fusion 1.4 TDCi Siemens Sid 804 R/W OBD CAN = OK

[smirnoff_rules]

worked for me

great , so was ok over obd , was the file 1.5mb ?

[Faraday]

MED17.4 peugeot 207 read write ok

[smirnoff_rules]

MED17.4 peugeot 207 read write ok

did it checksum too m8 ?

[Faraday]

I calc checksum with mpps18. Will check it later on car

[vasco fernandes]

MED17.4 peugeot 207 read write ok

obd or boot ?

[flyins]

ANYONE READ DENSO for this car with mpps ?
DENSO_SH7058_OPEL
cdti zafria B z17dtj 2010 kw 108-81
Also astra J on 2011 with Denso 1.5mb

[Faraday]

obd or boot ?

Boot mode..........

[HeXeN]

zafira 1.9cdti obd read is enough for chiptuning? or only egr/dpf off

[pulsar2000]

zafira 1.9cdti obd read is enough for chiptuning? or only egr/dpf off

Is enough for tuning, and incorrect DPF off.
im told BDM for correct DPF off , but then thats what im told,
never had a problem either DPF or Tuning via OBD
cheers

[dantetimoc]

Hi,

i have a problem to run mpps software, always i get "there has been an application exception error" at startup.
drivers are corecly instaled, tested with administrator rigts on 4 laptops on win7 proffesional 64, win7 home and win10. the softare was running once corectly on one laptop with a fresh installation of win7 before i have installed the laptop drivers and one time on a win10... then next day same error :)
So i guess the interface is ok but here is some strange situation....

[Faraday]

I did astra h 1.9 tva off OBD and Zafira B 1.9 EGR off OFF ok, just choose read all( where avaible)

[smirnoff_rules]

denso or delco ?

[konq100]

denso or delco ?
Hi,
or maybe EDC16C9/39 :D

[Faraday]

denso or delco ?

EDC16c9/c39

[pablo1971]

430201EDC17C50---BMW F SERIES ECU.

HAD ONE TO DO TODAY...OPENED THE ECU TO FIND THE PROCESSOR ON THE GOOD SIDE...USED THIS PICTURE TO READ THE PASSWORD (WITH NO BOOT WIRE ATTACHED---AND 12V POS ON K LINE).....THE CONNECTED TO BOOT PIN WITH NORMAL MPPS/FGTECH RESISTOR..AND READ/WRITE THE ECU NO PROBLEM.

[moky]

simos pcr 2.1 R/W obd ok

was unlocked few months ago with ktag

[smirnoff_rules]

430201EDC17C50---BMW F SERIES ECU.

HAD ONE TO DO TODAY...OPENED THE ECU TO FIND THE PROCESSOR ON THE GOOD SIDE...USED THIS PICTURE TO READ THE PASSWORD (WITH NO BOOT WIRE ATTACHED---AND 12V POS ON K LINE).....THE CONNECTED TO BOOT PIN WITH NORMAL MPPS/FGTECH RESISTOR..AND READ/WRITE THE ECU NO PROBLEM.

interesting , so it wasnt gpt or was it ?

[filutek]

Ecu Selection = Volkswagen Passat 2.0 TDI Siemens PPD 1.X
Bosch Hardware Number: 03G906018CD
Vw Software Number: 03G906018CD
System Type Number: R4 2.0l PPD1.5 G
R/W OBD/CAN = OK

[dantetimoc]

interesting , so it wasnt gpt or was it ?
edc17c50 from BMW F is GPT....

[filutek]

Ford Fusion Style 1.6 TDCi Bosch EDC16C34-2
Software Number 1 : 1037377399
Software Number 2 : 1037377399
Ford Hawdware Number : 9653239880
Ford Software Number : 5255A56D10
Ecu Type : BOSCH EDC16C34/2.2
R/W OBD/CAN = OK .... after write not error OBD scaner.

[smirnoff_rules]

edc17c50 from BMW F is GPT....

how was tricore connected please , ktag needs gpt cable

[hazard860]

Has anyone successfully used mpps v18 on win7 in VMware? I know the original will not run. Wonder if it works or if there is a common work around.

[vasycara]

Read written FLESH + MPC + EEPROM fiat marely 6f3, OK through OBD.
There are few tools that read-write EEPROM marely by OBD.
OBD-flash reading 3min 20 sec., 45 sec-writing.
MPC and EEPROM read OBD-20 seconds, 20 seconds writing (multyboot OBD) .A very strong and stable tool.

[gezame]

Hi
Fiat Stilo IAW6JF.P3, through OBD, mpc and eeprom read write for immo-off, all ok.
multyboot OBD

[H.Wessel]

Hi

I have a problem with my mpps reading vag edc17u01 by boot
Ecu identify perfect but when I press read and star to read but give me this error, anybody has this problem??

Regards

[airdrive]

Linea 2011 Marelli 6F3 read/write OBD Trought K-line, ( FG 54 read only flash trought CAN)
Crafter 2009 EDC15C54 dont work((

[imcumen]

peugeot 807 ECU DELPHI DCM 3.5 READ OBD OK

[filutek]

Fast plugging the pump PSG16 Astra G / Zafira A

ECU Type: PSG16
Bosch Software Number: 09202063 KC
Engine Type: Y20DTH
Bosch Hawdware Number: B02006

Checksums found 10 corrected 2
Ecu Selection = Opel Astra 2.0 16V CDTI Bosch PSG16

Bosch Hardware Number: BOSCH0100
Bosch Software Number: 09202063 KC
Opel Software Number: 0470504203

CRC calc. OK , R/W CAN OK.

[filutek]

Fiat Scudo as (Peugeot 3008) 2.0 HDI Delphi DCM 3.5

R/W OBD/CAN (CRC=OK) = OK

[bobolin4o]

Someone tested on Grande Punto 1.4 16V ME763?
0261208969_1037382549 in my case...
BR!

[cawadany]

Opel Astra J 1.7 D 110 hp year 2011, ecu denso.... Someone tested it read and write?

[smirnoff_rules]

Opel Astra J 1.7 D 110 hp year 2011, ecu denso.... Someone tested it read and write?
http://www.digital-kaos.co.uk/forums/showthread.php/547268-MPPS-v18-GOOD-OR-NOT/page25 has been read

[cawadany]

Only read?

[smirnoff_rules]

Only read?

they say both

[flyins]

Both read/write! Had no probs

[cawadany]

Both read/write! Had no probs

Do you have ori read with mpps of this Opel Denso? I want to check if mpps reads complete or partial flash. Thanks a lot for your help.

[Faraday]

peugeot 807 ECU DELPHI DCM 3.5 READ OBD OK

citroen c5 DCM3.5 read write OBD ok, checksum ok

[mprog]

TO ALL WHO NEED :)

PINOUT TRICORE CABLE

437246

Regards ! :)

[tehnosoftex]

HI, for those who has message "there has been an application exception error" when try to open the program, here is how I solve it:
Copy the software in c:\mpps
create shortcuts on the desktop for mpps, multiboot, tricore boot.
run only from shortcuts

[kukukatsu]

HI, for those who has message "there has been an application exception error" when try to open the program, here is how I solve it:
Copy the software in c:\mpps
create shortcuts on the desktop for mpps, multiboot, tricore boot.
run only from shortcuts

works works works!!!!!!!!!!!!!!

[mprog]

MPPS V18 automatic installer with TRICORE PINOUTS

32bit version
https://mega.nz/#!F1MhwDCR!3xK_EyRBLE_zw4wwyJrfEva1gCzXN2LkWmHIWbF BAAc

64bit version
https://mega.nz/#!s9sn2JCA!9DrDJlz8kvELaFy_Smp10IPWyV_lnH_WGH5lDeL tpU4

Regards!!

[tehnosoftex]

Hi, My interface from china are missing 2 components although seems to work good. D1 and U4, Anyone know what are they? This is a picture from the internet with these components in place.

[mikroel]

ME7.3.H4 boot mode read /write full OK


Sent from my iPhone using Tapatalk

[gazvts]

if i can remember correctly
D1=ESD protection CAN PESD1CAN
U4 = ESD USB

[budG60]

MPPS V18 automatic installer with TRICORE PINOUTS

32bit version
https://mega.nz/#!F1MhwDCR!3xK_EyRBLE_zw4wwyJrfEva1gCzXN2LkWmHIWbF BAAc

64bit version
https://mega.nz/#!s9sn2JCA!9DrDJlz8kvELaFy_Smp10IPWyV_lnH_WGH5lDeL tpU4

Regards!!

works with Euro and China clone?

[mprog]

works with Euro and China clone?

Yes, works :)

[moky]

Opel cdti 1.7 ecu Denso R/W ok

[Yura123]

Someone found the ability to run in Win XP?

[cawadany]

I found a problem on the tricore cable. The +12V switch is only on the pin 16 of the obd female. So it cuts the +12V only to the tool. The ecu is always powered. Check in yours cables and reports.

[yellowstilo]

mine too...

[moky]

Mine too, I think same on all chinese..

[Faraday]

Be aware edc17c46 fu@3 up checksum egr problem after write

[OVERSPEED]

Mine too, I reworked and put two switches one cuting all positive and another cuting Just the minor positives

By the Way, boot wire has no resistor to ground

[smirnoff_rules]

anyone tried on vag edc17c59 2013 skoda octavia over obd or even tricore ?

[morfej]

Opel Corsa 2004 1.3cdti ecu Marelli MJD6JO.C2 Read OK, Write NOT OK (using full read dump in both cases, read and write), ecu not booting at all.... need to fix it by BDM.

[gezame]

anyone tried on vag edc17c59 2013 skoda octavia over obd or even tricore ?
Hi
orry, but EDC17C59, is for gm-opel, not for vag.....

[smirnoff_rules]

Hi
orry, but EDC17C59, is for gm-opel, not for vag.....

sorry my mistake ,, l meant opel

[nbtechnic]

Suzuki SX4 DDIS 1.9L 120hp, Bosch EDC16C39 2008, can & kline, read & write by obd ok.

[datapage]

Amarok EDC17C54 , Error after write mpps v18 . Did not record full file.

[smirnoff_rules]

Amarok EDC17C54 , Error after write mpps v18 . Did not record full file.


439605
439606
was is tptrot 8 could u read password ?

[datapage]

mpps= read= unlok file = write unlok file = not boot = kess obd2 = open file unlok = write obd2 kess= ok

[vlaki electric]

opel corsa 1.3jtd MT marelli ecu 6J0 C1,read/write true obd=ok. he reads 448kb and write it,wery fast...

[meteor80]

Hello.
Does someone have solution for rework china clone.
Mine not works with fiat 6f3.d4.
6j3 works fine
best regards.

[nbtechnic]

Hello! Test and give news
439882

[nbtechnic]

Magneti Marelli 6f3, Reading at the BDM works very well!

[OVERSPEED]

Someone tested BMW320/328 F30 with MEVD17 ?

Cks by tool and password reading are Ok ?

[cawadany]

Someone has tested on Mercedes E270 W211 2.7 EDC16C2?
I tried to read it but it says "Invalid key". Id is ok.

[mircea13]

and what part no should D1 and U4 be ? nxp prtr5vou2x for U4 and nxp pesd1can for D1?

[smirnoff_rules]

Someone has tested on Mercedes E270 W211 2.7 EDC16C2?
I tried to read it but it says "Invalid key". Id is ok.

might mean file is locked with noread

[cawadany]

might mean file is locked with noread
Strange... I have read the same car before with another tool....

[HeXeN]

write which tool?

[fabio16hf]

Magneti Marelli 6f3, 6JF, 8F2, 8F3 in obd and multiboot with micro and eeprom works very well!

[nbtechnic]

Alfa Rom?o Giulietta 2L 170cv EDC16 C39 (can line): read/write by obd ok. Flash ecu failure: mode recovery ok.
Fiat Punto evo 1.3L jtdm 75cv Mareli Multijet MJD8F2/3:read/write by obd ok. Flash ecu failure: mode recovery ok.
Susuki SX4 1.9L 120cv EDC16 C39 (can line): read/write by obd ok. Flash ecu failure: mode recovery ok.

[moky]

sorry double post..

[moky]

be careful you have a problem with your mpps nbtechnic...edc16C39 and mjd8 work fine on good V18....without recovery........

[nbtechnic]

be careful you have a problem with your mpps nbtechnic...edc16C39 and mjd8 work fine on good V18....without recovery........

Write failure with fgtec v54, solder failure at the usb socket,
Recovery of ecu with v18 mpps. I confirm my mpps, read write without problem.

[moky]

it's clear now thanks

[kingarthas]

china for ever :)

[morfej]

moky ... why it failed to write MJD6JO.C2 (corsa C) than ?

[queroseno]

Reading psg16 opel zafira ok, writing ok but does not start, does not edit cheksum, write original, everything ok

[bobolin4o]

Reading psg16 opel zafira ok, writing ok but does not start, does not edit cheksum, write original, everything ok

Nonsense!
MPPS correct the checksum very well in PSG16.
Maybe you've use checksum correction in WinOls, btw... and it is wrong...

[TrevelXP]

Used MPPS V18 to Read Flash from Vauxhall Astra 1.7 CDTI 2012 Denso ECU very quick with no issues.
And also EDC17 CP20 on Volkswagen Passat 2.0 TDI 2009 took about 3 minutes..

[smirnoff_rules]

Used MPPS V18 to Read Flash from Vauxhall Astra 1.7 CDTI 2012 Denso ECU very quick with no issues.
And also EDC17 CP20 on Volkswagen Passat 2.0 TDI 2009 took about 3 minutes..
you where lucky passat wasnt tuning protected there

[TrevelXP]

you where lucky passat wasnt tuning protected there

Thats what i thought, I've looked at ECU ID Information and its been flashed before.
Owner said that the car been mapped by VW to do with emission.


Do you reckon is it safe to write the flash via OBD on this ECU ?
448191

[smirnoff_rules]

there isnt a change in hell l would right to that over obd , isnt worth the risk for me , if its dosnt start its not a simple fix

these are they only number l know are not tuning protected

-03L906022NH 3397 1037399332 tc1796 NO TP
-03L906022NH 4388 1037500120 tc1796 NO TP
-03L906022NH 5509 1037506174 tc1796 NO TP , no tp
1037563984 no tp .-03L906022NH 3397 1037399332 tc1796 NO TP

[mprog]

there isnt a change in hell l would right to that over obd , isnt worth the risk for me , if its dosnt start its not a simple fix

these are they only number l know are not tuning protected

-03L906022NH 3397 1037399332 tc1796 NO TP
-03L906022NH 4388 1037500120 tc1796 NO TP
-03L906022NH 5509 1037506174 tc1796 NO TP , no tp
1037563984 no tp .-03L906022NH 3397 1037399332 tc1796 NO TP

X17 fix it without problem :)

[kukukatsu]

does anybody know how to update v18 to v21 ?? and what are diffirences beetwin v18 and v21??

[2200]

Not possible.
you will brick your v18

[nbtechnic]

does anybody know how to update v18 to v21 ?? and what are diffirences beetwin v18 and v21??
Do not do this because there is a bug in the v21
It is not yet perfect the v21
You will be forced to return to v18

[morfej]

Anybody tried to read/write Renault EDC17C84 ?

[linu]

Hi friends , mpps in multiboot-obd can calculate cecksum ?
Marelli 6F3 or others...
Thanks

[mprog]

Hi friends , mpps in bootloader-obd can calculate cecksum ?
Marelli 6F3 or others...
Thanks

Yes, without problem :)

[linu]

Thanks friend ! Automatic cecksum ?
In the software I do not see !

[tarabostesul]

Audi a4 edc17cp14..read... write obd ok.
HW: 03L 906 022 B
R4 2,0L EDC H01 4375

[filutek]

NISSAN Q. EDC16CP33 (4A44383842) R/W OBD = OK (CRC-OK).

[athlonxp]

Try to read psg16 on opel astra, direct to pump via can and get 24.1kb file. What is wrong?

[bobolin4o]

Maybe this pump is already flashed with "noread" tag file...

[athlonxp]

any solution to fix k-line problem? do not find ecu via k-line

[bobolin4o]

Yes, it is possible...
If you can add a K-line driver in the software!

[athlonxp]

think that problem is in hardware but don't find problem

[bobolin4o]

think that problem is in hardware but don't find problem

You think wrong...

[athlonxp]

can you explain about k-line driver in software?

[bobolin4o]

can you explain about k-line driver in software?

There is nothing to explain.
Simply, MPPS V18 do not have capabilities to read and write PSG16 trough K-line.
If you want to flash PSG16 In Astra G, or Zafira A with MPPS V18, you must connect to CAN lines directly.
Vectra C, Signum etc - through OBD port.
It is not so bad for a 50-60 euro tool !!!

[athlonxp]

There is nothing to explain.
Simply, MPPS V18 do not have capabilities to read and write PSG16 trough K-line.
If you want to flash PSG16 In Astra G, or Zafira A with MPPS V18, you must connect to CAN lines directly.
Vectra C, Signum etc - through OBD port.
It is not so bad for a 50-60 euro tool !!!

You don't understand me, my tool not work via kline at all. Not psg16 but all cars via kline.

[OVERSPEED]

Jetta 2,0 16v TSi 200cv - MED17.5.2 Tprot10

Read in Boot = OK
made OBD unlock and CKS by MPPS, write boot = OK


But, tried to write another file by OBD:
1- tried CKS with MPPS => program stop responding (waited close to 1 hour)
2- make CKS by TRICORE module and try write by OBD it take less than 30 seconds and NO START

tried write first file, tried original file, and all no start

finally recovered with original file and KESS.

MED17.5.2 OBD UNLOCK = NOT WORKING

[moky]

Tested med17.5.2 last week with v18..no success too ktag chinese new Fw made it....perhaps i was lucky on hardware.... :D

[OVERSPEED]

Kess and ktag clone work (kess corrupted one with no recover)

[moky]

euro yes but i tested chinese this week and ...work too...but lotery i know

[tarabostesul]

siemens ppd 03G 906 018 AQ..................BRD: R4 2.0l PPD1.3 G 9973

read ..write obd ok..

[OVERSPEED]

Jetta 2,0 16v TSi 200cv - MED17.5.2 Tprot10

Read in Boot = OK
made OBD unlock and CKS by MPPS, write boot = OK


But, tried to write another file by OBD:
1- tried CKS with MPPS => program stop responding (waited close to 1 hour)
2- make CKS by TRICORE module and try write by OBD it take less than 30 seconds and NO START

tried write first file, tried original file, and all no start

finally recovered with original file and KESS.

MED17.5.2 OBD UNLOCK = NOT WORKING

Had car here to write again a tuned file, strange thing that MPPS can read file by OBD (only OTP area that are "FF" instead of value, but didn?t try write again...

Any tool that could write it ? original KESS complain about corrupted SW in file and don?t allow to write.

[zzz28]

Hi All!

It's possible to read iROM EDC17C10 Ford TC1797?
Read and write protected.
Impossible with MPPS EU clone?

br

[ivanrojo]

Hi all do you think mpps v18 works better on edc17 than kess v2 eu 5.017? i have neve test my kess on edc17 but i woul dlike your opinion if it will worth to buy v18 having kess v5.017 eu

[teerak2uk]

What pdf's are people using to make bench connections with boot tool?

[2200]

I think FGTech

[mircea13]

got mine today and it's working.both can and kline. tested on bmw edc16c31,edc15v/,edc16u1 .did someone tested edc16u31/34 ?460207
Missing esd protection both can and usb.shows voltage ok .working on can and kline on the above mentioned ecu.

[mircea13]

tested today edc16u31 on mk5 golf for a egr off, and all ok read write on kline.460356

[mircea13]

tested today e2p from edc15v, on bench. read and write on kline ,all ok.

[smirnoff_rules]

did a lt edc16u1 this week . kess didnt want to know ?

https://i.gyazo.com/fe94fa02dc3b0989bfebf037189042be.jpg

[mircea13]

china or eu ?

[smirnoff_rules]

mines china but was one of the first batch , the best one before they started leaving things off

dont use alot mostly kess but if kess fails which it can now and again mpps seems to take you the slack

[electrones]

Hi friends


I need good clone from EU, i sent to mail for this site http://www.car-prog.com/ until now nothing any feedback
I need suggestions


Thanks cheers

[mircea13]

what do you they cheanged on the second batch ? mine is missing both usb and can esd protection. voltage shown by the software is ok. kline/can works ok on what i've tested so far .

[mircea13]

is the software stable ?

[electrones]

Hi friends


I need good clone from EU, i sent to mail for this site http://www.car-prog.com/ until now nothing any feedback
I need suggestions


Thanks cheers
Someone can teel where i can find a good clone from EU...

Sent from my SM-G935T using Tapatalk

[mixbox]

Anyone know if possible to use with BMW EDC17C06?
OBD possible?

[smirnoff_rules]

Anyone know if possible to use with BMW EDC17C06?
OBD possible?

its always a risk with edc17 , this ecu opens easy , boot is safer , if you trust your tool you have to make a choice

[donesko]

anyone tested eeprom r/w can , on marelli 8df 8f2 ?

[mircea13]

tested edc16u1 from T5 2007 1.9tdi AXB 77kw. read write ok over obd on kline. make sure you remove the fan plug from fan controller when writing on this cars. when flash is erased the fan will work on max speed .

[dorofteius]

Ems3132 Bootmode. Read ok. Write not ok.
It erases the flash and cannot write.
Revived by k-tag.

[mircea13]

eu clone or china clone ?

[dorofteius]

Eu clone. But it is the same as china.
I bought from Italy. EU clone as they say.

[HeXeN]

Is this for real? v21 on v18 http://blog.obdii365.com/2017/07/06/install-mpps-v21-on-windows-7-32bit-64bit/

[mircea13]

mine didn't want to find ecu on kline on a 2008 passat 3c 1.9 tdi edc16u31. only way to connect to ecu is can.

[mircea13]

does anybody know why i can't find ecu on kline on some cars like audi a6 c6 2.0 tdi edc16u31 and passat 3c 1.9 tdi edc16u31?

[morgano]

does anybody know why i can't find ecu on kline on some cars like audi a6 c6 2.0 tdi edc16u31 and passat 3c 1.9 tdi edc16u31?

Other tools can find ecu on K-Line (Kess, Galletto...).?