View Full Version : BT 50 immo box replacement
ecufix
8th September, 2016, 03:56 PM
Hello world ,on a 2010 mazda BT50 we found the immo box to be broken so we got a used one from the breakers .I do have the code from the ecu question is can this code be valid for donor immo box? please advise , thanks ,regards
raptureready
8th September, 2016, 08:49 PM
Hello world ,on a 2010 mazda BT50 we found the immo box to be broken so we got a used one from the breakers .I do have the code from the ecu question is can this code be valid for donor immo box? please advise , thanks ,regards
is it not possible to move processor from damaged box to donor box or data transfer as to use original key still or if you know the codeword and could place it in correct position in donor box and then code in keys again, might be something to consider if old box not to broken
ngakson2002
8th September, 2016, 11:14 PM
Hello Mate,
Just swap the MCU from the Broken Immo to the Donor Immo and Car will start.Or post ECU dump + donor Immo and transponder data here, someone will help you to synchro them.
Best Regards
ecufix
9th September, 2016, 08:36 AM
Original mcu in immo box seems to be the problem , transferred to donor immo box and the symptoms are same ,no indicator light, how does one read this micro ?please ,regards
ngakson2002
9th September, 2016, 08:42 AM
Original mcu in immo box seems to be the problem , transferred to donor immo box and the symptoms are same ,no indicator light, how does one read this micro ?please ,regards
Hello Mate
Send information about the immobox.
It is the Lucas 19AS, 34AS , Mitsubishi TCxx or the new TRW immobox
All the best
ecufix
9th September, 2016, 09:15 AM
It is made by Mitsubishi , micro is mc68hc805p ,regards
ecufix
9th September, 2016, 10:01 AM
It is made by Mitsubishi , micro is mc68hc805p ,regards
The part number of mcu sc514624 dont know if it is mc68hc805p ,regards
raptureready
9th September, 2016, 06:05 PM
I think Tmpro has a cable and module for that processor
Sent from my iPhone using Tapatalk
ngakson2002
11th September, 2016, 06:12 PM
The part number of mcu sc514624 dont know if it is mc68hc805p ,regards
Hello
In this Mitsubishi IMMOBOX, keys data are stored in the 44 Pin MCU known as Motorola 68HC805P18. Possible to read it using Tmpro2 Hardware and adapter or ETL.If you don't have any of these programmers, either you will need to buy a complete Kit (ECU and IMMO) or carry out immo off using Emulator and for this PM the member with user name OKURA he will help you.
Best Regards
Meat-Head
12th September, 2016, 09:46 PM
Somewhere is an indesion dump no immo on here try sesrch ford ranger
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.