PDA

View Full Version : Audi A4 login



kari11
19th September, 2016, 03:12 PM
Hello,

Can someone help me to login?
Audia A4 2005.
I carproggal read out of the dashboard.

Thanks
Kari

vlaki electric
19th September, 2016, 06:25 PM
Hello,

Can someone help me to login?
Audia A4 2005.
I carproggal read out of the dashboard.

Thanks
Kari
try 4248 pin

helmi reguig
19th September, 2016, 11:21 PM
___________________________________

haroutioun
20th September, 2016, 06:39 AM
Hello,

Can someone help me to login?
Audia A4 2005.
I carproggal read out of the dashboard.

Thanks
Kari
Hello.
on Audi Rb4 + Rb8 must read by obd2 or from engine ecu. but pin alone can't help you, best way to done any operation on this dash get special tool to continue.

kari11
20th September, 2016, 09:28 AM
try 4248 pin

It does not accept the code. I want to program a new key. The engine ecu can I read the pin, but do not accept it either.
He writes: "Controller refused to send a seed! Error 37: Required time delay not expired."

vlaki electric
20th September, 2016, 09:40 AM
It does not accept the code. I want to program a new key. The engine ecu can I read the pin, but do not accept it either.
He writes: "Controller refused to send a seed! Error 37: Required time delay not expired."
you need to wait lock time and haroutioun has right,read ecu for pin code. i try to find in dump and i think is that but is not sure

lupu_sandu
20th September, 2016, 09:46 AM
Forget about pin on RB8 dash. WTF is wrong with you guys?
This subject was discussed here, over and over again.

kari11
20th September, 2016, 09:58 AM
you need to wait lock time and haroutioun has right,read ecu for pin code. i try to find in dump and i think is that but is not sure

Already after the first attempt he wrote it.

kari11
20th September, 2016, 09:59 AM
Forget about pin on RB8 dash. WTF is wrong with you guys?
This subject was discussed here, over and over again.

How to program?

lupu_sandu
20th September, 2016, 10:10 AM
AVDI, smok, etc
OBD2 only

haroutioun
20th September, 2016, 12:05 PM
How to program?
Hello.
in post (#4) i explain to you,by you need special tool to done.

kari11
20th September, 2016, 12:36 PM
The transponder must be programmed in advance?

haroutioun
20th September, 2016, 01:22 PM
The transponder must be programmed in advance?
Hello.
for example... if you are using avdi the avdi he prepare the transponder and learn the new prepared transponder to immo data.all this can done by obd2.

kari11
20th September, 2016, 07:57 PM
Hello.
for example... if you are using avdi the avdi he prepare the transponder and learn the new prepared transponder to immo data.all this can done by obd2.

FVDI I can do it with?

haroutioun
21st September, 2016, 05:54 AM
FVDI I can do it with?
Hello.
fvdi not trusted tool.